...rotate the stem inside the cartridge 180 degrees and reassemble. The cartridge should only fit in the valve body at a fixed position. If it won't turn don't force it as it may be necessary to remove ...
Question about 87530 Touch Control Single Handle Kitchen Faucet with Protoge Side Spr...
when it does it in the wrong handle position The valve (cartridge) is installed 180 degrees backwards. Remove it (cartridge assy only) and rotate it halfway and reinstall. Same for a Moen Shower valve
Question about 3175 Legend One Handle Shower Faucet With trol Pressure Balancing Valve....
...in the handle body. turn the artridge around 180 degree and reisntall all parts. simple. tuke off handke, rotate stem 180 degrees and put handle back on. no need to turn off water. takes two
Question about DELTA/PEERLESS FAUCET CO. 25901 TWO HANDLE LAVATORY FAUCET - CHROME
...rotate the right stem stop assembly 180 degrees. This will change the rotation of the handle to the other direction. he has the wrong cartridge in the wrong spot, hot on cold and cold on hot,, they ...
Question about 1 Handle Lever Shower Faucet With POSI Valve NI
...(Hot direction ) the knob will turn until water gets cold again ??? The cartridge sounds like it was put in 180 degrees out. Pull it back out, and rotate 180 degrees and re-install & try
Question about & Single Handle Shower Faucet
...180 degrees and it still does the same thing. I am so confused. Please help! Thank you. Hello. It sounds like your plumbing was installed wrong, with the hot and the cold supply lines reversed. If ...
Question about & Single Handle Shower Faucet
rotate the cartridge 180 degrees since there is an arrow the should face up when installing the cartridge. To add, the holes on the back of the cartridge and valve won't match any more if I rotate it.
...direction, Do I just turn the cartridge 180 degrees? Yes all you need to do is to remove handle from stem of cartridge and rotate stem 180 degrees. Reinstall handle and you should be ok.
Question about & One Handle Tub & Shower Faucet
...180 degrees off? Or is water piping messed up? Easy one. Feel the pipes. The pipe on the right should be cold. If the pipes are correct, turn the cartridge 180 degrees. I have reversed the cartridge ...
...to spin. the stem unit/cart may also be installed 180 degrees out of place. pull the lock clip and use the remover tool that came with new cart to rotate it 180 degrees with water supply turned
Usually answered in minutes!
136 Questions
113 Questions
61 Questions