Questions & Answers for: px502

...You can read teh full details on how to do this here: ...

...it out to get rid of dust and it very likely has a problem that will require service. My quantum px502 had a stuck tape and I took the cover off but the picker was already off track - $700 to fix ...

...out to get rid of dust and it very likely has a problem that will require service.  My quantum px502 had a stuck tape and I took the cover off but the picker was already off track - $700 to fix ...

...50 The unit will need to be repaired.  Consider getting a maintenance contract on it as my px502 cost me $700 to replace a sensor and cleaning and a few other minor

Quantum PX502 tape library is showing a "Servo Quantum PX502 tape library is showing a "Servo init failure--Stalled XY" when powered on. Then continues to restart. Library has worked with ...

Have a Quantum PX502 tape library running BackupExec 12. Tape library documentation refers to "38 slots" and backup Exec sees 38 slots. However... when I pull out the drives,9right and left0

lto-3 tape drive slow I'm only getting a throughput of 4MB/s. Will cleaning the drive help? I've tried using a cleaning tape, but I'm not sure if the drive is using it as it never ejects. ...

...The above may be helpful but i cannot see the error codes listed. This unit is the same as the PX502 so this may also help ...

QSB channel failure Hi Tom I am not certain but it sounds like the tape drive might not be seen by the library. Try removing and re-installing the drives into the library. LTO Repair service UK Based ...