Questions & Answers for: pull projector screen

...projector and now seem to have a convergience problem. Does this little screen matter or does it pull all the colors together? thanks for your help yr previous buld is it burn out or explode ? if ...

...projector refused to shut off...the screen displayed a blank blue wall with a big red "X" mark on the left corner...I had to pull the plug just to shut it off...I know it's not a good practice but ...

I can't get my computer screen to project through the projector. your task has to be minimized by 1/2 and mouse clicked and pulled over had same problem

...Pull Down Projector Screen Was told this screen may weigh up to 20 pounds This screen needs to be installed (hang) from the ceiling, not on the wall. Type of Ceiling in office is called a 'drop ...

...after you pull up the main menu or if attach a laptop to it you will see a light burn in of that screen. Your projector needs to be aligned and serviced, normal occurrence after 6 years since

...projector screen will not retract. It is pulled all the way down After pulling the screen down to the desire length, The mechanism will lock itself once you stop pulling. To retract it, you need to ...

...screen when I rotate the image. When I pulled out the bulb component from the projector, the bulb did not flicker when I turned it on-so I know it wasn't that. it is most likely the dmd board on the ...

I pulled the screen down all the way and am not able to release it to make it go back up. It seems to be stuck. csbala, In most cases when the screen is pulled too far you can get it to release by ...

I have toshiba p621dls with broken projection screen. Does anyone knows where can I buy this screen? thanks.. Sir try to check this link http://www.interliquidparts.com/ good day and best regards. ...

...pull down a Quartet projection screen 70" and it will not stay down. Where can I find replacement parts and a parts diagram. Please respond to [email protected] Thanks Someone familiar with this will ...