server's MAC address. Next, in the Printer Name or IP Address enter the assigned IP address, example (192.168.5.3). For the Protocol select LPR. LPR Settings: Queue Name: same as 1P_PrintServ?????
Question about ExtendNet SX Print Server
...Printer ESI-2841 - Link Light fails to come on. I have three ESI2841 Pocket Printers and we can not get the Link light to come on. We have checked and double checked the hub and the LAN cables. The ...
Question about 1-Port USB 2.0 10/100 Mbps Print Server (ZPS1001) Print Server
...server, set it up following all directions. on the device the power and lan lights are green, but the USB light wont turn green. the web config detects my epson printer giving this screen: Printer ...
...server: ● View printer status information ● View and print internal pages ● Determine the remaining life on all supplies and order new ones ● Set the size and ...
Question about DP-300U (DHDP300U) Print Server
Printer (Brother HL-5140 laser)just quit working. Rebooted print server D Link DP-300U by removing power waiting and reinserting power. Status lights on print server front. Only power light is ...
Question about InterCon IC105-FASTPOCKET-TX (0889418030225) Print Server
...the print server the status light constantly blinks and never comes up ready. So the printer can't communicate with my computer. Help Please! I am running windows XP. install your printer driver ...
...server Hi, I have an ML-2510 laser printer. The red light is blinking, but it still prints. I tried to start Samsung Dr Printer, but it throws error "Unable to connect to the server. Please retry a ...
Question about HL-5370DW Duplex Wireless Laser Printer
status of the printer and it was trying to print some 3,000 envelopes, OOPS!!! Needless to say I cancelled the job but it still had to go through all of the pages before cancelling and finally stopped
Question about Hl2240d - Hl-2240d Laser Printer With Duplex Printing - Laser Printer
...printer on. All lights will turn on. Keep holding Go until status light goes off. Press the Go button 2x. The Paper, Drum & Toner light will come on Press Go 6x Status light will turn red Close ...
Question about Zpw4000 1 port Usb 2.0 Wireless Print Server blue Share Your
Printer disconnected from desktop and usb cabled to print server. Plugged in per manual. Status light should flash 5X, go steady, and wlan light come on - status light keeps flashing and wlan does not
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
