Questions & Answers for: print margin

...Margin' button Unit will display/print Cost To calculate Selling Price: Enter Cost, press 'Cost' button Enter Profit Margin, press 'Margin' button Unit will display/print Selling Price To calculate ...

print it on this printer, the left margin turns out too narrow and the right margin too wide. The document will print out fine on other printers, but it is off about 4 letters to the left on the T610.

...margin 89mm(3.5 Inches). For the best print quality, position margins no closer than 15mm (0.6 Inch) from the edges of the envelope. Avoid printing on the seams of the envelope. Envelopes with a ...

...print a half-inch top margin, but the page is printed with NO top margin. When I set the top margin to one inch, it prints a half-inch margin. I tried recalibrating the printer, reverting back to the ...

...print preview?? Hello and Welcome to FixYa! The portion within the Margins can only be printed, lessen the top margin at bit. I remember the top margin for default is 1', change it to 0.5' or 0.6' In ...

...margin settings in the print preview option, make sure you decrease the margins that are set by default and try printing a test page , this should work fine. On the File menu, you need to click Page ...

margin setrtings foe Lexmark P4350 If you are preparing to print a document that you have created in Microsoft Word, you may be concerned that all the text on the page will print exactly as you see it

...print a booklet 2 pages per sheet double sided. Printing is OK but spacing is no good for the binding when the pages are cut in two. What instructions should I give the printer to allow spacing all ...

WON'T PRINT TO MAXIMUM PRINT AREA Initially the printer printed to maximum margins. On one computer, it will no longer print to maximum margins. (This is the computer used most often.) Two other ...

...print 2 inches from left margin and right margin runs off right edge. I know its the printer because when I send document to a Dell printer, the margins are equal. Guess you are not using the same ...