Question about 3000cn Color Laser Printer
open the Reg cover (inner rear cover). The first time this happened there was a jam, but after removing the jammed paper I kept getting the same grinding noise and no activity in the paper tray. After
the fuser (the thing at the top rear of the 3100) All they had me do was open the rear top cover, pull the outer blue clips and "unplug" or remove and reinstall the fuser. That cleared the error. Tony
...open the cover of the printer, the RESUME button will flash until you close the cover. The printer part that will hold the cartridges (called the cartridge cradle) moves to the center of the printer. ...
...Open rear door of printer, Take out the rolling assembly unit (see fig 3) by using screw driver ( 2 screws in hole left and right; two at the bottom left and right) 4. Clean careefully the area that ...
Question about Officejet Pro L7590 All-in-One InkJet Printer
...rear of the product. Press the Power button ( ) to turn on the product. If these steps resolved the issue , there is no need to continue troubleshooting. If the issue persists , see the next step. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
