Questions & Answers for: maytag washer fabric softener gunk

Maytag I have, but it is dispensing Fabric softener at the wrong time (too late?) so I have softener stains on my clothes. Is there a clog, or is this mechanical, like a switch is not working and it's

Maytag Washer: How to Remove Tub I want to clean between the inner and outer tubs of my Maytag Atlantis MAV6257 top load washer. I flipped the top off, removed the top plastic collar, removed the ...

...washer goes through a complete cycle, but the dispenser stays full. If this is the case, you can take some cotton swabs and/or toothpicks and clean these holes real good. It may be a bit meticulous, ...

MAYTAG STACKABLE WASHER/DRYER FABRIC SOFTENER DISPENSER I WOULD LIKE TO KNOW HOW MUCH SOFTENER I USE AND IF I NEED TO DELUTE IT. I HAVE FILLED IT UP AND IT SEEMS THAT IT IS TOO MUCH SOFTENER FOR THE ...

...fabric softener in my Maytag doesnt empty completely and a thick residue accumulates Hello Donald, I did not help out with much just wanted to make sure your machine type is a FAV6800A/FAV9800A. I ...

...Maytag Neptune TL I think there might be build-up. Is there a way to 'flush out' this drain? Thanks, Dot Dot, If your machine is a FAV6800AW/FAV9800AW See if this post will help you. Once the Fabric ...

...maytag neptune TL fabric softener cup seems to be clogged, what do I do? If your machine is a FAV6800AW/FAV9800AW see if this post will help you. Once the Fabric Softener top is removed you can flush ...

...washer? Set your machine to 60 degree wash. Now add 1/2 a cup of Washing Soda or 4 cups of baking soda Crystals and run the machine with no clothes in it. Your drain will sparkle, and it will remove ...

fabric softener dispencer not working properly, we are getting softener stains on our clothes. at the end of the cycle, there is undiltued softener in the bottom of the drum. I just had this problem ...

Maytag Performa does not rinse well even on second rinse. Blotches on clothes. Have cut way back on detergent. Still does it. I had the same problem. It was a buildup of gunk (don't know how else to ...