Questions & Answers for: ge microwave door tight

...turning and the microwave wasn't heating the food This would most likely caused by a door switch. It is either not being activated by the door not closing tight enough or the switch itself has ...

Advantium 120 problem I returned from being out and found the Advantium 120 non-functional. No sounds with button pushes; only a flashing hyphen (minus sign). dis connect from power alow to reset for ...

GE Profile Microwave and the handle is broken.... GE is telling me I have to buy a new door?? is this true? I see 2 screws holding the handle in the door I have the same issue. The Handle broke off my

GE Advantium The door is very tight, and difficult to open. I should have called within the year it was under warranty but I thought it would losen up. Any suggestions? That's odd. I think you're just

...to GE spacemaker seems loose. Microwave and oven will only run if door is held by hand is a specific position. Have the door of your microwave adjusted and screw is tight, so you won't be holding

...GE advantium speedcook microwave oven. When using 'speedcook' feature, the oven starts, then there is sparking inside the circuit board area, followed by a loud POP, and this trips the breaker. It is ...

...GE profile model jvm1850dm2vv microwave oven. Can I access it from the area where the replaceable filter is? The oven interior bulb is on the top. Look closely at the grille above the door. There are ...

...microwave GE model # JVM1440WH04 spacemaker has no heat coming out of it. My husband heated microwave lasagna in it last, everything works except for the heat, any solutions? Push the microwave door ...

GE Profile Microwave JES2251SJ02 door mechanism become defective or loose since Microwave won't run because it thinks door is not closed properly AND it's not! How can I fix it as nothing else wrong? ...

...GE above range Model PEB1590SM2SS Microwave/Convection Oven. Do I have to remove the outer shell. I want to replace the door switches on my GE above oven Model PEB1590SM2SS. Do I have to remove the ...