20 Most Recent
Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White Questions & Answers
Frigidaire stuck in DR mode
Good Morning ShawnR, thank you for your post!
An error code DR commonly refers to a door lock malfunction. I understand you have reprogrammed the range by unplugging it. It is important to wait approximately ten minutes and then turn your range back on. Typically, this will clear most false error codes. If the error code continues to display, your range could possibly have a faulty door latch, light switch or EOC (electronic oven control). I am fairly confident that an authorized service agent will be able to restore your appliance to its normal operating condition. You can often locate a qualified service technician on the manufacturer website.
Thanks for allowing me the opportunity to assist you!
Oven is locked I can not get it open
You should be able to hold down the "Clear/Off" button for ~ 5 seconds and it should unlock. I had to do this a couple of times to get mine to work correctly.
Glass inside oven door.
chuckbr,
You asked, there are no instructions how to manually clean the door glass on the inside of the door.
They sell a range cleaner that is like the type of liquid compound you use for your car.
It's thinner an smoother. Just ask at home store!
it's easy.
bless You,
huuum,
Please give me a solved rating before you sign off
I left silicone guard on grates and put on self cleaning. My oven is now filled with a white powder.
Thank you for your inquiry, Cheryl!
I understand that you left the silicone guard on the grates and turned on self-cleaning, now you have white powder inside of your Frigidaire range. This can be removed by using hot water, baking soda, and a non-abrasive cloth. It may take elbow grease in order to remove the white powder. I would recommend not using the oven until you have removed the white powder. I hope this information is helpful for you. -Matt
How do I get self clean to work on older fridgidare stove
Move the safety lock/lever at the top of the oven door to the right and press the self clean button on the oven control panel, it is an automatic cycle so it will lock the door from opening and then will proceed with the auto clean cycle. Good luck !
Frigidaire oven displaying the f1 error code
You are experiencing a runaway temperature, or too hot of a temperature for the control board and sensors within the unit. When the unit gets this error code it shuts down for safety reasons. You would need a professional to diagnose the connections and control wiring to the control board, and the elements for safety.
My frigidaire stove I have to umplugg it because keeps beeping f10 can' stop I push any bottom and keeps beeping
Hi Elizabeth! From what you have posted, your appliance is experiencing a high-temperature error code (F10). A high-temperature error indicates that your oven has reached too high of a temperature for too long of a time period. If unplugging your appliance does not prove to be successful, you would require a visit from a professional to check the temperature sensor and the electronic oven control (brains of your appliance behind the touch pad). If you have any other questions please comment so I can help!
Thanks,
Chris
Where are the fuses located in a frigidare stove
Good Afternoon Friend, this is Z. Thank you for your post!
I understand you are seeking the fuses location in your Frigidaire range. May I please have your model number? You can typically locate the serial tag (which lists your model number) in the storage drawer, on the right side. Please describe what your appliance is doing so that I can assist you better in pinpointing the problem before you take this step. Thanks!
Ms. Cortes bought 20 blouses for P2,400 and marked
total cost of blouses p2400
16 sold at p145 = 2320p
p2400 - p2320 = 80p loss on original stock cost
to make a p480 total profit p480 + 80p(cover loss) = 560P
560P /4 = 140p
560p +2320 p = 2880 ptotal proceeds
profit = proceeds - original stock cost
profit = 2880p - 2400p
profit = 480p
Answer is 140p
My Frigidaire Oven display panel won't come on all
If the burners and oven light are working, then you have power coming in. It's most likely a defective EOC. If you haven't tried turning off the circuit breaker for 5-10 mins to reset any glitch associated with a surge or spike, do so. If this doesn't reset the control, the EOC will need to be replaced.
Not finding what you are looking for?
