Questions & Answers for: how to find check valve on saniflo

Question about 013/003/005 Sanibest Toilet with Grinder Series Pump in White Round

1 Answer

...Saniflo unit in a small downstairs bathroom which services a small hand basin and a toilet, just recently the pump/macerator has started to continuously run after use, the only way to stop it is to ...

Ad

Question about & Saniplus& Macerator Pump

2 Answers

...valve pipe and circuit board have been replaced but problem remains..please advise me.. Which pump model is this? Could be that the pressure chamber may be stuck on the on position. There is a rubber ...

Ad

Question about & Saniplus& Macerator Pump

2 Answers

...check valve may be leaking back, float may be faulty, toilet maye be leaking and filling tank causing pump to come on. Check out this link with a trouble shooting guide for this unit. This first kink ...

Question about & Saniplus& Macerator Pump

1 Answer

...pump. Water could be leaking from the check valve on the discharge elbow into the pump or from the toilet tank into the bowl. Inspect the flapper on the check valve and the flapper on the flush

Question about SaniPlus-Round SaniPlus Macerator Toilet with Round Bowl

1 Answer

...check valve on saniflo where is the check valve? Jim:The check valve should be the fitting coming right out of the unit. It is a one way valve that only allows the unit to push water out. The check ...

Question about & Saniplus& Macerator Pump

1 Answer

...(with electric disconnected)  clean unit (worth a gentle jet wash outside!).  Lift motor out and check rubber membrane so see if still soft.Also check the plastic shut off valve on the

Question about & Saniplus& Macerator Pump

1 Answer

...yu can help Trevor thanks . it might have become direct with the main line: 1) must shut the valve off 2) check the internal floating valve whether it works or not and might have to replace

Question about & Saniplus& Macerator Pump

0 Answer

...valve saniplus toilet we have a new saniflo plus, installed a few weeks ago, and today it wouldn't pump out and was filling with water, we found that the non-return valve was stuck closed. what could ...

Saniflo works perfectly, but once flushed and motor stops pumping there is a fast knocking sound as if a valve or flap is opening and closing. Lasts about 20 seconds and then gradually slows to stop ...

I have a saniflo and every few minutes it makes a sound, doesn’t humm but sounds like it’s refilling, is there something wrong? Check flapper for leak and or worn flush valve

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66979 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...