drain solenoid My ge nautilus portable dishwasher quit working. When I turned it on, the dial would not move through the cycles at all and the dishwasher just ran constantly untill I noticed the smell
...drains out with gravity simple really This will not work on GE unless drain solenoid is held open .Remove capped off outlet or tub boot to empty all the way.Hope this helps .Please rate my response
Question about 25 in. Nautilus GSC3400J Free-standing Dishwasher
...drain solenoid kit rather is it filling all the way? add a pitcher or two of hot water to it in the wash cycle. if it cleans the dishes better that your problem. Now you can just delime it and be all ...
Question about Nautilus 24" Built-in Dishwasher
...solenoid which get's pulled down to direct the water out the drain hose for pump out, which is suppose to spring back out of the way to allow water to go up to the spray arms for washing. I suspect ...
Question about 24-7/8" Convertible Portable Dishwasher - White-on-White
...drain valve and solenoid assembly, the motor, and the pump. If your dishwasher uses a belt to drive the pump, and it has broken or come off the pulley, replace it. If you have recently installed a ...
Question about 25 in. GSC3200GWW Free-standing Dishwasher
...drain at any point in cycle. Timer advances, but a loud click that precedes draining is missing, leading me to believe it may be a faulty solenoid, but it may also be the pump. Anyone have any ...
Question about 25 in. Nautilus GSC3400J Free-standing Dishwasher
...drain out into the sink. This process repeats but the water never cycles inside to actually wash the dishes. Tried to clean it all out, checked for potential clogs and found none. Even ran some CLR ...
...drain flapper solenoid may be getting worn out/hot causing the problem. The solenoid needs to be tested. ---------- To get more details,click the link below:--- ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions