Questions & Answers for: dishwasher cycle length

Cycle won't start, just flashes I have a Kenmore 16299 dishwasher. When pressing start, the light just flashes. I've tried the Cancel (Drain) cycle several times and that doesn't do it. Help! first of

...cycle Hi... If you dishwasher fails to drain you need to check this following: Check sink drain and drain hose for restrictionsThe drain hose and recirculation hoses can be responsible for leaks. The ...

Why has the length of wash cycles increased? The wash cycles are increasing in length, almost 3 1/2 hours, and it has stopped sanitizing. What's wrong? You probably have an issue with the electronic ...

dishwasher now read 199 on all cycles except the rinse and hold, the santitized light does not come when its done. The repair guy told me the count down timers were flakey on the the Bosch dishwashers

Meiko DV 80.2T: How much water does one cycle use, what is the length of the cycle. i need this info to size the water heater 1)It will take 3 liter per cycle. 2)up to 9 kw heater is sufficient.

...dishwasher yesterday. Model 13242 It has been running for almost2 hours and is still on the washing cycle--no water in it however--is this normal? I'm in a bit of a panic as we are canning and I need ...

dishwasher cycle. Lately, the cycle will go down to 3 minutes, then sit there running at that time for several minutes and then jump back up to additional minutes. The total cycle ends up way too long

...cycle on the Undercounter Elite model? Mine seems to run about 2 hours. That seems way too long to me. Hi, Nah... that is about normal for a dishwasher today....if all else fails just soak everything ...

...dishwasher fills with water then just empties without washing without any input from you to explain, sounds like your drive motor (pump) is malfunctioning. does it sit there for the length of cycle, ...

...dishwasher is locked on delayed wash , how do I unlock it tried hitting cancell won't work try turning it off at power point and wait 3-4 mins and turn on again at p point. some you have to hold two ...