Questions & Answers for: clear scanner memory

Question about MFC 7420 All-In-One Laser Printer

1 Answer

memory" it sounds weird but the scanner locked is coming up because the scanner is not going back to its home position. if there are faxes in its memory, it means that the memory has not been cleared.

Ad

...scanner will clear all channel memories and reverts it the state it was in right out of the box. To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen ...

Ad

Question about BC340CRS Base Scanner

1 Answer

...THAT THE DISPLAY SAY'S "CLEAR". ALL FREQUENCIES WILL BE CLEARED IN THE MEMORY!! THEN TURN Scanner OFF reinstall the BATTERIES, TURN BACK ON AND START PROGRAMMING!! THIS WAS FOR A "BC340CRS" ...

...and 9 keys down, turn the scanner ON. CLEAR will flash for about 5 seconds as the scanner clears its memory and restores factory settings. Do NOT turn the scanner OFF until CLEAR stops flashing. Bill ...

Question about Pro-94 Scanner

1 Answer

...scanner ON. CLEAR will flash for about 5 seconds while the scanner clears its memory. NOTE: Do not turn the scanner OFF until CLEAR stops flashing. Need the operating manual for your scanner? You can ...

...scanner To clear all information that you've programmed into the scanner you can perform a RESET to original factory settings: 1. Turn off the scanner. 2. While holding down the 2 and 9 keys, turn on ...

Question about BC340CRS Base Scanner

1 Answer

...Then, while holding down 2, 9, and HOLD, turn on the scanner. All scanner memory contents are erased. Here's the link to your manual as well: http://www.uniden.com/pdf/BC340CRSom.pdf Hope this

Question about Pro-97 Handheld Scanner

1 Answer

...scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen ...

Question about Pro-97 Handheld Scanner

1 Answer

...scanner will clear all channel memories and reverts it the state it was in right out of the box.To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen ...

Question about Pro-97 Handheld Scanner

1 Answer

the Scanner (Clearing all Memories) To reset the scanner to factory defaults, turn off the scanner. Then, while holding down 2, 9, and HOLD, turn on the scanner. All scanner memory contents are erased

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...