Questions & Answers for: brother mfc 9600 machine error

...Brother MFC 9600. There was a crumpled paper jam inside the fuser unit. I took all the covers out just to remove the paper jam, connected all the connectors back on, including the connector on the ...

brother mfc 9700 error 77 hey i am naresh from guyana i have a brother mfc 9700 all in one and i am having a error 77 thermistor short circuit ( 76 Heater harness disconnected or broken. Or heater ...

Brother MFC-8600 What is Machine error 76? Machine Error 76 - fFxing Heater Harness Disconnected or Broken. Solution: replace Fuser Unit

brother mfc 9600 error 78 nedd help solving it Try turning the machine on and then off - you may have to unplug it

...mfc 9600 shows machine error 76 can you explain the fault It will not do anything but show this fault That tells you either the wires to the fuser are un-plugged, or the fuser is burned out. Most ...

...MFC-9600 means there is a problem with the motor inside the printer. You can try unplugging and waiting a few minutes, then plugging back in again. If it is still coming up with the error, if its ...

...Brother fax machines. Press the Menu or Menu/Set key.  Then Fax, Miscellaneous and Compatibility.Press the Up or Down key until you can select Basic.  Basic reduces the modem speed to 9600 ...

...Brother fax machines. Press the Menu or Menu/Set key.  Then Fax, Miscellaneous and Compatibility.Press the Up or Down key until you can select Basic.  Basic reduces the modem speed to 9600 ...

Brother mfc-j6910dw error 76 printer code thank you everyone for your suggestions I will try each one until fixed, or I run out of suggestions :-) Solutions to Fix Brother Printer Error Code 76:- ...

Clear "error 76 : Unable to clean" on brother printers mfc-j430w Most likely, The machine has a mechanical problem or a foreign object such as a paper clip or ripped paper is in the machine