Questions & Answers for: benq lamp light red

Question about PB6100 Multimedia Projector

1 Answer

...Benq LCD projector to give powerpoint presentations. Lately the projector shuts down shortly after powering up. Just before it shuts down the Power and temperature indicator lights flash in red and ...

Ad

Question about (200NSH-LAMP) Projector Lamp for PB6100, PB620

1 Answer

Benq PB6200 projector lamp or other problem I have had this projector for 3 years. Twice this last month it turned off on its own. (no bad lamp warning yet) Two days ago, the projector turned off ...

Ad

lamp remains green) and then the whole thing shuts doewn (power led is yellow) fan shuts off. What gives? Is it a faulty temperature sensor... BENQ was less than helpful.. Be sure to check the filters

...benq logo start up, then it all shut down and the temp light and the lamp light both started blinking red. Unplugged it and waited a while and tried it again. Same thing happened. this model is prone ...

Question about PE7700 Multimedia Projector

1 Answer

...BenQ PE7700 can project it's logo for about 10 seconds until the "Power" light becomes yellow, the "Temp" becomes red and the "Lamp" becomes red. We've had this problem before but it started to work ...

Question about PB8220 Multimedia Projector

1 Answer

...lamp won't light up. Remote doesn't work except for power-on/off and laser. On power-up, lamp lights for 5 seconds then shuts off and lamp LED indicator lights up red. After cool-down and shut-off, ...

Question about W10000 Projector

2 Answers

benq w1000 project not turning on When turning the projector on, the green power light flashes for about a minute or two and the the Temp light goes green and the Lamp light goes red. Look at the ...

Question about PE8720 DLP Projector

1 Answer

...benq logo then lamp goes off. on top of projector lamp light is red. repeat lamp does go on seems as bright as ever but shortly after benq logo goes off. By my recollection lamp is not beyond it's ...

Question about PE8720 DLP Projector

1 Answer

Benq W500 new lamp won't turn on... Powers up (can hear fans turn on), power light blinking green, then switched to steady orange power light and steady red lamp light. Replaced the lamp with new one ...

BenQ w1080st. Just replaced lamp, after it has been working fine until bulb broke. Now green temp light comes on and screen goes dark after 3-4 min? just replaced the lamp with Osram replacement as ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66975 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...