Televison & Video Logo

Related Topics:

Joseph Rodrigues Posted on Aug 31, 2008

Picture blinks on and off on my Trinitron Color TV, KV-35S36

When you turn unit on picture flashes on and than off to blank screen, sometimes it will stop and TV picture will stay on. This happens if the power is off and set cools down, if you leave the power on, pictures is fine

  • 2 more comments 
  • bluesquest Oct 07, 2008

    When I 1st turn on my set the picture blinks for several minutes and eventually stays on. It seems to blink more on video that requires alot of light colors to display

  • Anonymous Nov 07, 2008

    Picture blinks off and on when turn on and seems to be getting worse.

  • Anonymous Dec 17, 2008

    after 10 minutes of blinkin off and on it stays on sony 35 inch trinitron

  • Anonymous Mar 09, 2009

    Same

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Jan 26, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jan 26, 2009
Answers
2
Questions
0
Helped
778
Points
3

My Trinitron Sony Television flashes off and on constantly and has horizontal lines.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

My tv has sound but no picture. The screen is greenish in color.

SONY TRINITRON TV 32 INCH MOD# KV-32FS10 SER# 9006800 PICTURE INTERMITTENTLY BLANKS OUT AND COME RIGHT BACK NEVER LOOSE SOUND.
28helpful
5answers

Sony Trinitron blank tv/no picture

When I turn on the TV I hear the click sound and the TV powers up. Immediatly the red (standby) light begins to flash 6 times on and off. this happenes only in the morning, but after 5:00PM when youturn on the TV as if nothing is wrong.

what is the problem?
0helpful
1answer

Sony kv32s42 trinitron color tv blinking

sounds like a bad picture tube. Picture and bright settings cranked up for a good pic? Test/rejuv with a crt tester and/or look at the Ik signal on the crt board. A good tube has 3 small pulses during blanking. The crt cathodes are checked with these pulses, pulses too low and the jungle IC will blank the drive. If the picture fades in and out I would check the filament ckt but that doesn't support the "blinks"
0helpful
1answer

Blank Picture, Sound OK on Sony TV

Hello, there can be a contact problem in power supply, deflection or RGB stage. Please ask the tech to repair it for you. Best regards, Arpi
0helpful
1answer

Please Help

call a tech your tv needs to to be repaired the problem is in the power supply and related circuit.good luck.
3helpful
1answer

Please Help

Is the red light flashing a code ? exaple 4 blinks pause 4 blinks ?
0helpful
1answer

Sony 27"TV will not turn on

The picture tube on your tv is dead, you need to replace it. It probably will be worthing just purchasing a new set, because the cost of repairing it will be close to the purchase of a new one.
0helpful
1answer

No sound or picture now

The set may have shorted the horizontal out put transistor since it kept coming on sometimes. This could be cause by the driver transformer arcing causing a "spike" in voltage going to you horizoltal out put transistor. Stargazer
1helpful
1answer

No picture just clicking sound

with your model number manny have a defective flyback part number is 1-453-310-11

regards,
daniel.
0helpful
1answer

TV solution

You may have a bad solder joint on the horizontal driver transformer or somewhere else in the set. I found this problem with this transformer several times. Stargazer
Not finding what you are looking for?

362 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...