20 Most Recent
Questions & Answers
I have a Trinitron Wega 32HS510 that sometimes will not turn on. It sounds like it is going to turn on but shuts down immediately. The red light fast blinks either 6 or 7 times over and over again
The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name"
to your device; in the "Search box at the top right of the display window of the Homepage
" to get gathered related posts.
4/30/2017 1:53:33 PM •
on Apr 30, 2017
Why does my sony weta model KV-32HS510 stand by indicator blinks 6 times?
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic
" or "Magazine
" will make surf easy.
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
8/1/2014 2:38:18 PM •
on Aug 01, 2014
Power shutting off during use
If you have some knowledge in electronics, concentration and patience, you can do it by yourself. The power board can be bought from the authorized service center for Sony. Never use a different power supply board, than specified. Replace it with a genuine one. http://google.com/+GopakumarGopalan
12/28/2013 5:37:53 AM •
on Dec 28, 2013
Sony KV-32HS510, worked perfect, turned on the next day and all I got is flashing red light.
I think I have the solution for you. I have the same tv and it does the same thing when you turn on the power button on the remote when the tv turns on you hear a click then the red light flashes about 5 to 6 times then the tv comes on. on the remote there should be two buttons on top of the remote one says power and the other one says system hit the power button to turn on the tv when you hear the click and see the red light flashing then hit the system button which will turn off the tv then hit the power button again and it will turn the tv on without the red light flashing it should work
12/15/2013 5:41:38 PM •
on Dec 15, 2013
Turn on my Sony FD Trinitron WEGA KV-32HS510 32"
blinks - B+ over voltage protection (OVP), unit goes to the standby mode then
displays the 3 blink fault. This is also a problem in the power supply circuit,
check T603 and R672.
This is the fault with 3 blinks. If you wish to get more, check the site linked here.http://electronicshelponline.blogspot.com/
up previous posts, either by brand search, or view it in Mosaic /
Timeslide / Flipcard
8/19/2013 7:16:56 AM •
on Aug 19, 2013
Problem with Sony FD Trinitron WEGA KV-32HS510 32" TV
Blinking of standby LEDs to Sony TVs are fault indications. Form the number of blinks occur at one time, the repairman can get an idea of the faulty stage inside it. According to you, it blinks 4,6 & 7. Just visit
this site, It has details about blinking codes to Sony TVs, both CRT based, Flat panels and Plasmas. I can't provide more advice to you, because the number of blinks are not constant. Check the site, and get it.
1/23/2013 10:08:05 AM •
on Jan 23, 2013
How do you reset a sony tv
Visit this site named 'Electro-help' for details. If you want to reset the NVM, you have to enter its Service Mode options to do it. Service Mode options to almost all brand of TVs are description here in detail. Check this link
, and select the site named above.
8/2/2012 3:47:31 PM •
on Aug 02, 2012
Where do I find the 8 pin IC number
Hello"D" power board is nothing, but its power regulator board itself. I think you are not handy to do the work with power regulator baords. It is dangerous to handle power boards to any TV without proper experience.
3/2/2012 12:04:12 PM •
on Mar 02, 2012
Not finding what you are looking for?