I need a driver for a MAD DOG MD 16XDVD9A4 - do you know where I can get one?

http://www.downloadcollection.com/device_doctor.htm

Device Doctor is a freeware Windows application that scans your computer hardware and checks to see if there are new driver updates available for your devices. It also locates drivers for Unidentified Devices in the Windows Device Manager. This tool was designed to be very simple and easy to use

hope this helps

The best I could find was an ad for one on ebay, $14.85

https://www.ebay.com/itm/Mad-Dog-MD-N18BA-128ld-Agp-Video-Card/171594627861?hash=item27f3d63b15:g:KVIAAOSwkNZUke-C

See: http://www.MajorGeeks.com and search for "Ashampoo Burning Free" software.
Download and install this FREE software, to make it easy to burn CD/DVD disks,
if your hardware supports writing CD (and DVD) disks.

hey you need a software, nero, roxio, etc. something like that, or your maddog have its own software together with your dvd drive. you just have to open the application.

You need to get a straightened paper clip, or similar stiff wire, locate the small hole in front draw of DVD, insert wire and push gently in, until you feel/hear a click, keep pushing and the draw will pop open.

Do you have Windows XP? If so XP does not burn DVD's on its own it requires third party software.
A simple Google search will find free software for you.
I personaly like burn4free it can be found here.

First do windows update until everything is fully updated, pay careful attention to any hardware update that is needed in the left column and if that does not help go double click on MY COMPUTER select the drive( D) then right click, go to PROPERTIES then RECORDING set or change your defaults.
Hope this helps.

I need a 98 driver for a md-18xtfe thank you

http://liggydee.cdfreaks.com/page/en/NEC-ND-4550A/

Look for the Mad Dog OEM ND-4550 1.F3 driver on this page. You can download the original FW or the RPC1 FW. Hope this helps

mad dog does not make there own hardware.
check the label on the drive to see who manufactured it, then go to their website & download the latest drivers & firmware