Power cable Hi, Where can i get a power cable for a 2000fp flat screen monitor?

looks like problem in internals cards
from my point of view i recommend you to buy a new one !

check the cable

NO PC stated(wow 1)
are you web connected, if now why expect PnP to work>?
you do not need any drivers for any monitor.
the config files for it only limit max resolution

why not lower the resolution your self in windows
to 1600 x 1200 at 60 Hz !!!
then it works , every time that is if the CCFL lamps are not dead, as all are now. those lamps do not last 15 years, if used for 15 years.
not possible.
buy a 2010 or newer LED monitor and dump this ping in the bin.
drivers are only for GPU chips only (screen answers)
the monitor runs a config file only, you can even read it and edit it of you wanted

this monitor was first made in 2001, yah 17 years ago
and microsoft does not support monitors that old. now.


the unstated PC , needs to be core2 and intel gen 5 and newer
or you can not upgrade to w10 .
64bit rules are not the same w7 and 10,
w7 is more lax but do consider the facts on 10.
why post lacking what PC this is.?
my guess its a relic of no value, at all.
some old XP box from 2001?

See my tip here: http://www.fixya.com/support/r6820093-hard_drive_or_monitor_randomly_switching

It is not so difficult to repare if you have scills to open the monitor and scills in un-soldering/soldering electronic components, than yes it is worth it, but if you go to a shop they have a tendency to sell you another monitor since the price they charge to repare the powersupply is about the same as a new monitor

You have bad El-condensator on secondary side of power supply.

This is a common problem, I don't think the LCD per say is bad. The backlight tube may be bad or the power inverter that powers it may be bad. GO to support.dell.com and search for these parts, get them both and replace them both. It is tricky as you must dissasemble your laptop lid panel.

The monitor is going bad. Either going to be a bad screen or a bad inverter. Also Since you tried it on another computer and its still giving you the same symptoms, you know the computers are fine. To be sure, try another monitor on your computer and if you get video on the new monitor then thats another way of verifying that the dell monitor is bad.

If all your lights are on on the front on the 2000FP then the logic board is bad and the eeprom at49bv8192at will need to be replaced and reprogrammed. Check out www.lcdrepair.us for Instruction videos on the 2000fp as well as parts
http://www.lcdrepair.us/Installation.html

I just fixed my Dell 2000FP LCD monitor and right now using it.

The solution is very simple and easy. Do it your self if you are comfortable soldering.

Resolder the 2 transformer legs ( 9 legs each transformer), 2 oranger capitors, 2 small green capitors, 2 inductors coil legs.

Use at least 45 watts soldering iron with a pointed tip. Be careful.

Roan