Canon image class mf6500

You don't say what model your fax is.

In general. If when copying you get a Full BLACK page printed then the scanner lamp is not lit. As no light is reflected into the image scanner, it interprets this as BLACK information so therefore only black is printed. Look into the ADF while the document is being scanned and I bet you will see no green light at all. A new Contact image sensor should cure it.

Bulbs -usually burn out, all at once,haven't you had that happen

Blue Bulbs- are illegal in most states & you asked about the most
light. Won't get that from some aftermarket fancy color gimick

So Dim Lights--that is a problem obviously
You will have to have that diagnosed,I won't guess
at it. Only visual inspection & testing will establish why their dim

hi my printer canon mf 4412 printer is not working it is showing error batten red light showing , display is not showing pls solve problem pls it is urgent

CHANGE OUT YOUR TONER FOR ANOTHER ONE 2. YOUR PRINT HEAD NEEDS TO BE CLEANED 3. YOUR FUSER IS DIRTY

Drivers can be found at these sites:


imageCLASS MF5770

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5770#BrochuresAndManuals


MF6500 Series UFR II Printer Driver Ver.2.00 for Windows Vista x64

http://canoncanada.custhelp.com/app/answers/detail/a_id/8350/~/mf6500-series-ufr-ii-printer-driver-ver.2.00-for-windows-vista-x64

Check at www.precisionroller.com they have parts like that for your printer.

Go to:

Canon MF6500 Series Support

If the Drivers & Downloads tab is not selected, click on it.

Although it shows a MF6550 at the top, the software and manuals are for the 6500 series of printers. There are guides for printing and scanning further down the list you can download too.

You do not say what operating system you have, but there are only drivers for Vista and Mac OS.

Thanks for using Fixya.

to remove the printer from offline right click on it and choose online. and use this link for driver http://canon.driversdown.com/Canon-driver-list/s_119_1.shtml

If you are running component video, make sure the blue is plugged in and in the right spot. Component video works like this: the green is a black and white image, the red and blue are cover overlays to make the image display properly. So if everything looks plugged in right, then try plugging in a composite video (Yellow) or S-video cable switching to the appropriate input, and see if the image is still red. If so, go to the set up and set the set to factory defaults, and see if that fixes the color issue, It's possible that the color settings on the TV are messed up, with the S-video plugged in go through the set up menu and see if you can correct the color issue IF THE IMAGE IS STILL RED WITH THE S-VIDEO OR COMPOSITE VIDEO, otherwise the issue is a problem with the component video cable.