Had a universal remote for my symphonic wf2703 tv my daughter tryed to change something with the remote now plays the dvd player ok turn it off all that comes up is a black screen with video on it the original remote wont work or the universal i think maybe somehow she changed a default setting on the tv any suggestions
Re: Had a universal remote for my symphonic wf2703 tv my...
I had to clean the sensor area for the remote on the tv somehow got something on it. I wonder how, my little 4 yr old daughter had know idea how it got there lol.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your TV is responding as if the Game button was pressed on the original remote. The additional stuff on the screen is to let you set the best brightness and other settings for video gaming. These screens should disappear on their own in 10 seconds if no buttons are pressed on the remote. See the manual http://www.symphonic.us/support/manuals.aspx and fill in the model number. If the remote were still controlling the TV, the CH up and down buttons would let you choose the Picture settings to change and volume up and down buttons would change the setting.
The TV/VCR button on the universal remote may be swapping the remote to control the VCR only. (Thus losing the ability to control the TV.) (What does the manual say about the button for the universal remote?) You may want to consider a different universal remote - programmable or http://www.remotes.com/remotes/servlet/rs?a=Search&o=c&uid=0&m=ST419E&uuid=12844254442790 which has an exact substitute.
Check your cables for the sound issue (try new ones) and make sure that they are fully seated in the jacks.
Step 1
Turn on the component you wish to sync to your universal
remote--your television, DVD player, VCR or stereo.
Step 2
Point the remote at the device you are programming and press
the corresponding device button on the remote. These buttons are labeled
"TV," "VCR", "DVD," etc. Hold the device button for three to five
seconds.
Step 3
Push the power button on the remote. This should turn on the
device that you are syncing.
Step 4
Push the "Channel Up" or "Channel
Down" button on your remote gradually until the device that you are
programming shuts off.
Step 5
Press "OK" or "Enter" on the remote once the synced device
turns off.
Step 6
Press the device button for the component you just
programmed, and hit the power button while pointing the remote at the
component. If programmed correctly, the device should turn on, and you
should be able to control it with your Living Solutions Universal
Remote.
scroll down on the channel button from channel 2. the different aux inputs should be there.there may also be a video/line in/source button on the front of the tv.if there isn't, you can buy a cheap universal remote for under $10 [even in some dollar stores for $1]
wg
Now if it was me I would go for a universal remote. Have one remote control all devices.
I know the DirecTV remote can control several devices as well. I would look up your reciever's manual and see what it says on programming the DVD player.
Then the only way to reach your tv is through coaxial antenna port. So
you can buy an rf modulator ( very cheap) and connect your red yellow
and white cables (rca cables from a dvd, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me.
×