Need to reset netgear wireless router password

No. To prevent others from changing the setup you hae to set another pasword.

If you have changed the default password, you need to reset the router to the factory settings to get in with the default user and password (user admin and password as password, or if that doesn't work try 1234 - these are the default password for NetGear routers). Note that you will lose the ISP settings and wireless settings when you reset the router.

Here's a video on how to reset the router to the factory default settings: http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

If you have changed the default password, you need to reset the router to the factory settings to get in with the default user and password (user admin and password as password, or if that doesn't work try 1234). Note that you will lose the ISP settings and wireless settings when you reset the router.

Here's a video on how to reset the router to the factory default settings: http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

On the back of this netgear router there is a pinhole you need to sitck a paperclip into and hold down for 15 secounds, This will reset the router back to its factory settings, the password should be admin username admin or admin/password if you having trouble please refer to www.netgear.com for the cross reference to my solution today.

Thanks please do be considerate and leave postive feedback and ratings for ALL experts involved in helping you today with your solution.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Power up the Netgear and press the pinhole RESET button on the back of the Netgear until all the LEDs flash, then release the RESET button.
The Netgear is now restored to the factory default settings.

On most model Netgear wireless routers there is a reset button on the back of the router which reset the router back to the default factory settings. The location of this button is printed on the label.

Power off the router, press and hold the reset button (you need a sharp pen), power on the router, wait several seconds and release the reset button. You can now configure the wireless router again using the default admin login.