My belkin router is not giving of signal. all my systems say it has 100% signal strength but they can't get on the internet

You Can Try Changing the Wireless Channel on the Router you have 11 Different Channels Available.

> Steps to change the Channel

- Open Internet Browser on Hard wired computer & Go to 192.168.2.1

- Towards your Left Corner Under Wireless Click on Channel & Ssid

- Leave the Password Blank Click on Submit

- Change the Wireless Channel To Number 1 or 6 or 11.

- Click on Submit

- Check the Signal Strength

- If you Still Have Low Signal Strength you Can Try Updating the Firmware or Changing the Wireless Mode to G only... :)

Hi,

Probably the Router signal strength is low.
You need to open the EWS page ( Router configuration page ) and increase the signal strength to 11 ( it must be Auto or 1,2,3, etc )

EWS Page ( Router page ) can be opened using the Router IP Address which may be 192.168.1.1 or if you know it. Open Internet Explorer and enter the ip address and hit enter ( without www or .com )

Under Wireless configuration or settings you will find the Channel Strength. You need to restart your Laptop to get connected again to the network after saving the settings are you will loose the internet connection.

Regards,
Shawn

Take an Ethernet cable, and connect one of the LAN ports on the router to the network-port on your computer. If you cannot get Internet access, then it is the router that is the problem, namely, that the 'WAN' side of the router has not connected to the Internet.

80% is a good signal strength....but if you want to increase the signal strength, then you need to move the wireless router to a very ventilated area, also the router should be placed atleast 5 feet away from other electronic devices like, modem, ups, microwave ovens,refrigerators etc.... also there should be a line of sight between the router and the wi-fi adapter... but in order to connect to a wireless network 25% of signal strength is enough....

You can connect 2 routers to each other. But the IP address will be different for both the routers .
It will be better to keep different names for the wireless network.
If you keep the same name, then it doesn't mean that the signal strength will be good. Because both the routers will broadcast their own signals.
If you want to increase the signal strength then you can purchase a wireless range expander.
Click Here for more info about the networking

• internet radio may require more signal strength, that is why the farther you are the weaker the signal, you may need an access point to extend the signal strength
  

do check the signal strength of the wireless connection..you can improve signal by removing any big objects between the compu and the router/access point and/or re positioning the router.also intervening walls will affect signal..the fact that you are getting a linksys signal impilies that your home network signal is weak..hope it helps!

Booster will only work along with access points in your case the belkin wireless router - you have to connect the device to the router not to the windows xp pc

if you know how to configure and the device are compatiable to each other and allows bridging or can configure as your access point client then you need not wanna to get it connected via wire or T568b standard ethernet cable otherwise you have to connect with this cable will enchance the wireless activity

Wireless signals can go down its strength by any magnetic activity, oscillations such as microwave, powerful steel/metal frames and check your anteena position keep in different direction and check your pc wifi signal strength.

Interlink between your router and booster with utp cables gives you steady flow of data and full band strength.

Aviod using two company devices change the router to Hawking
Thanks Hothawk

k login to the w/l router and change the channels to 11>or 1 use always use these only and delete all teh temp files and delete cookies and clear history and check with antena which is straight>and reboot the router and laptop>and rate me solved if its help full

The fact that it sometimes works and sometimes not, would indicate that maybe your wireless signal strength is poor. Try moving the router and/or antenna and recheck the signal strength. If you would provide more details about the problem and your setup it may be helpful in diagnosing the problem.