20 Most Recent Belkin (F5D6230-3) Wireless Router Questions & Answers


I have a Belkin F5D7634-4

A virus can completely spoil your work, your computer and Leptop. It is especially recommended for all internet users to install effective antivirus software like Webroot Antivirus to eradicate the virus problem from the computer. It offers unmatched service to identify the possible threats and accordingly warn its users about the virus problem. Now if you are wondering how to install it, give us a call at 1-800-445-2810 the Webroot Antivirus Customer Service Phone number. Our certified team is ready to offer you any help remotely whenever you encounter any glitch while using Webroot Antivirus antivirus or installing the same.For more information please visit at http://webroot.technicalhelpdesknumber.com/
6/30/2017 6:21:27 AM • Belkin... • Answered on Jun 30, 2017

My wireless router modem wireless

Assuming it has been running well in the past, it is likely there is some interference coming from another wireless source, most likely a cordless phone that you may have recently acquired.

Try to re-initialise the modem and see if there is any difference.
6/1/2017 9:08:48 AM • Belkin... • Answered on Jun 01, 2017

Can't get the wireless to work on my belkin

With the power on hold down the power button for 7 seconds and it will factory reset the router. Should have success using this, if not it means the hardware for the wireless component is faulty or broken.
4/27/2017 4:45:43 AM • Belkin... • Answered on Apr 27, 2017

My internet light blinks and

First reboot your router and then call your cust. service for your internet and have them trouble shoot and reset your connection.
4/27/2017 4:42:23 AM • Belkin... • Answered on Apr 27, 2017


WIn XP has a built in Firewall that may be enabled. To disable this Click on Start, go to control panel and then network connections. Right click the local area connection and go to properties. Click the advanced tab and uncheck: Protect my computer and network by limiting or preventing access to this computer from the Internet. If you do not do this it can prevent you from using the router or even accessing the router configuration screen. The reason it causes a problem is the router already has a firewall and the built in firewall can cause a problem.
8/9/2016 1:01:42 PM • Belkin... • Answered on Aug 09, 2016

How to block websites from belkin 54g f5d7634-4 wireless router

That router cannot block specific websites. You would need to install a program designed to do that on the computer you wish the websites to be blocked from.
2/4/2013 6:56:37 AM • Belkin... • Answered on Feb 04, 2013

Voip phone adapter will not function when connected

I hope you've gotten the problem resolved by now. What is the GS model?
11/17/2012 5:50:25 PM • Belkin... • Answered on Nov 17, 2012

How do I security enable my Belkin router?

Hi there,
Connect a computer to any one of the four LAN ports of the Belkin wireless router. DO NOT use a wireless connection, use a cable.
Open your web browser and type the IP address of the router (by default, the address is in the address bar and press Enter.

Click Login on the top of the page to login to the router. By default the Password is left blank, click Submit.
Click Security under Wireless menu.
Under Security, Select 64 bit WEP (or 128 bit WEP).
Select Key 1 and enter any 10 hexadecimal digits - any combination of 0-9, A-F (26 digits if you selected 128-bit as the encryption strength). You may also enter a pass phrase and have the router generate a key for you. Example (0102030405060708090a0b0c)
Apply the settings.
Please write down the key – You will need it later to configure your wireless computers with the same key.
Remember to set an admin password before you close down, other vice anyone can access you router and change the setup and admin password.
9/9/2011 10:15:41 AM • Belkin... • Answered on Sep 09, 2011

My Belkin "Wireless" light keep

Try resetting the Belkin back to the default condition.
To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and thenpower for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open abrowser on your laptop/computer and enter the Belkin's configuration URL.
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
4/25/2011 10:39:12 AM • Belkin... • Answered on Apr 25, 2011

I have this belkin and I want only myself to use

Hi there.
I'm sure you want to secure your wireless network so only you can access it. There are many ways in doing this But first you have to change the router's default password to this You can enable the wireless encryption so you will be prompted to type a network password before connecting to your network. Lastly you can enable MAC filtering.
To enable wireless security click the link below: http://www.belkin.com/support/article/?lid=en&pid=F5D8231-4&aid=10177&scid=0 To enable the MAC filtering click this link below: http://www.corenetworkz.com/2009/07/enable-mac-address-filtering-in-belkin.html
4/5/2011 1:25:36 AM • Belkin... • Answered on Apr 05, 2011

I think I changed my belkin router to an access

Hello Geagleso,

I would recommend checking to see what your computer is using as a default gateway. Press the Windows key and the R button at the same time to open the run window and then typy in "cmd".
In the command prompt you will want to type in "ipconfig" to get the configuration of your network adapter. Your default gateway should be the router. If you still can't access the router using the default gateway IP address then you will need to reset the router using the reset button on the back of the unit near the power cable.


11/7/2010 2:54:37 PM • Belkin... • Answered on Nov 07, 2010

How can i get a

Unplug your modem then your router anywhere from 2-5 minutes, then plug in your modem then router and it should automatically reset itself and find your IP address if not call Belkin an they can help you.If you have Cox Cable you have to register w/them first they can also help w/your problem. That's what I did anyways.You would be surprised at how much they can help. Good Luck
10/20/2010 6:32:55 PM • Belkin... • Answered on Oct 20, 2010

Security light wont stay on belkin wireless router


Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works
10/20/2010 10:53:51 AM • Belkin... • Answered on Oct 20, 2010

How to open my NAT


Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem
10/20/2010 10:51:30 AM • Belkin... • Answered on Oct 20, 2010

Belkin f5d7634-4 opening ip
9/30/2010 9:30:55 AM • Belkin... • Answered on Sep 30, 2010

Belkin wireless router f5d6230-3 login error.

Because default password is not working.... Please Re-set your router in order to re configure it. Press the re set button for 1 min (tiny hole at the bottom)
Hope this info hrlps
8/24/2010 3:45:11 PM • Belkin... • Answered on Aug 24, 2010

We have a belkin wireless G router with three

Perhaps one of your neighbors is leeching off or your connection. Is you router secured?

If you are serious about fixing, I will need to connect with you remotely to take a look. I have the software needed to connect.

Email: [email protected]
8/15/2010 5:33:55 PM • Belkin... • Answered on Aug 15, 2010
Not finding what you are looking for?
Belkin (F5D6230-3) Wireless Router Logo

89 questions posted

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts


Level 2 Expert

691 Answers

Brad Brown

Level 3 Expert

19187 Answers


Level 3 Expert

8093 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

belkin want only myself use

  • Computers & Internet