20 Most Recent Belkin (F5D72304F5D7000) Router Questions & Answers


In some cases, older 802.11b clients may not be compatible with 54g wireless. These adapters tend to be of lesser design or use older drivers or technology. 54g-LRS (Limited Rate Support) allows these clients to be compatible with the newer 54g technology. Switching to this mode can solve problems that sometimes occur with these clients. If you suspect that you are using a client adapter that falls into this category of adapters, first check with the adapter vendor to see if there is a driver update. If there is no driver update available, switching to 54g-LRS mode may fix your problem. Please note that switching to 54g-LRS mode may decrease 54g performance. It is not recommended you use this mode unless you have a very specific reason to do so. This mode exists only to solve unique problems that may occur with some 802.11b client adapters and is NOT necessary for interoperability of 54g and 802.11b standards.

Belkin... • Answered on Feb 09, 2021


Just Install the hardware and insert the driver of the router...then follow the instruction...

Belkin... • Answered on Aug 28, 2018


open internet explorer and type 192.168.2.1 and the will get u to the belkin router page and then click on mac address control and then type ur password to get in to the router and it will take u to all the mac address u have allowed or denyed

Belkin... • Answered on Aug 28, 2018


What is the code that you posted? It is not clear what the issue you are facing is.

Belkin... • Answered on Oct 18, 2013


To reset the Belkin back to the defaultsettings -Press and hold the pinhole RESET button at the back of the router and thenpower for at least 15 secs. Then release the RESET button.Connect a LAN cable from Belkin to your laptop/computer's LAN port, open abrowser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1The default PW = blank (just press Enter)You can now change the default admin password.You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Belkin... • Answered on Jun 16, 2012


go to this website

http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D7235uk4&aid=7063&scid=282

and download setup cd you will need it to setup the router properly

Belkin... • Answered on Aug 31, 2011


First off, make sure the management IP is indeed 192.168.2.1to do that start > run > cmd > type "ipconfig" and press enter, the Default Gateway's IP address is the router's IP address.second step, ping it. you should get a replay backlastly, if you still cannot open the management page, the issue is probably with your browser, one common reason is a configured proxy server on the browser, remove it.for Internet Explorer: Tools > Internet options > "connections" tab > press "LAN Settings" > uncheck all three checkboxes there.I Hope this helps

Belkin... • Answered on Jun 11, 2011


You should be able to download from the Belkin website.

Belkin... • Answered on Apr 18, 2011


Go to this WEB site for instructions on connecting the PSP to a wireless router.
http://fixhomenetwork.com/xbox-play-station-wii.php

Belkin... • Answered on Apr 17, 2011


Access your router's setup page by going to 192.168.2.1. Verify the wireless settings set in your router. Take note of the wireless network name or SSID, the type of wireless security enabled and the security key. Configure these wireless settings in your XBOX

Belkin... • Answered on Feb 23, 2011


To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Belkin... • Answered on Feb 09, 2011


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Belkin... • Answered on Feb 05, 2011


Hi duke2222171,

For you to access the router page just open a browser then type 192.168.2.1 on the address bar and it will ask you for a username and password.the default username is admin and the password is blank.

Rate me if this works so that i can help others.

Thanks for using Fixya.

Belkin... • Answered on Jan 28, 2011


In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.

There a great article at General Router Setup.

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Belkin... • Answered on Jan 21, 2011


WIRELESS ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Regard ,
Milan

Belkin... • Answered on Jan 11, 2011


Call your internet provider with your account, grab at hand,(if is router from your internet provider)what does appear and what does not appear on your router, maybe its lost it way out.

Belkin... • Answered on Nov 05, 2010

Not finding what you are looking for?
Belkin (F5D72304F5D7000) Router Logo

108 questions posted

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Resolution IT Dubai
Resolution IT Dubai

Level 3 Expert

541 Answers

Mike

Level 3 Expert

4377 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

dont remember password

  • Computers & Internet
Loading...