When I plug it in the red remote stand-by light comes on when I push the power button on the remote the red light blinks then goes off but there is no picture or sound?

Try pushing the source button on your remote after the red light stops flashing, Keep pushing the source button until it is on "TV". You may have set the remote to one of the aux settings by accident. My dogs do it to me all the time. Good luck.

check the psu, if you can manually switch the power the power then its going to ease your work

Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

flashing power light:

projection TV`s have many protective circuits in them, they protect your CRT`s from damage, over voltage called x-ray, and many others, you need to have it checked before the damage is more costly, your TV is not happy and needs to be checked

WHEN I PUSH THE STAND BY BUTTON THE UNIT GETS ON AND IMMEDEYETLY GETS OFF(YAMAHA RXV-995 IF IUSE 500VA STABULISER THAT PROBLEM NOT COMING PLEASE SOLVE IT

What is wrong when it is in Stand by mode blinking red light 4 times, then pause, then 4 times....

How many red and green blinks to you see? (What pattern?)

I have the sames t.v you have to go in the back flip the power cord switch...then reboot the t.v.

My system seems to be locked in stand-by. When I unplug and replug the red power light comes on, but bwhren pressed just starts blinking like in stand-by. Help