SVA-USA Televison & Video - Recent Questions, Troubleshooting & Support
The TV won't turn ON
i just replaced the power board got it off ebay.lj44-00025a.now the led 8004 turns red.
SVA EV-1703 Manual
You can use a laptop charger, as long as the connecter to the TV fits it'll work. I'm using one for my old set. I bought it from the Salvation Army for $5 without a power cord.
Hope this helps!
SVA TV will not turn on.
I've got old sva tv I was watching tv n went off then didnt com on any suggestions plz
1/5/2018 5:30:34 PM •
SVA-USA...
•
Answered
on Jan 05, 2018
My screen is black.
If the screen is black and the sound is working, it sounds like possibly one of your cables might have worked loose. I would check them all, and make sure no one accidentally took one off and put it in the wrong place (kids?) or maybe someone bumped into them and one is loose. Or, depending on how you have it all set up (there are ways to get sound without picture) it is possible your source is set incorrectly and you can still have sound.
1/3/2018 2:31:07 PM •
SVA-USA...
•
Answered
on Jan 03, 2018
Wont turn on just makes a click like it is trying
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
3/27/2017 4:45:38 PM •
SVA-USA...
•
Answered
on Mar 27, 2017
SVA PLASMA TV
I got this same tv from a guy in my area he would press the poewer botton on the tv and the standby light comes on and then turns off, so he gave me the tv for free i took the back panel off, and everytime i press the power botton the green light came on where the screen board is and went back off after i let the botton go i took the power board out took it to a repair shop to see if there was anything a wrong with it everything was good so i replaced the two fuses on the board and the one on the screen board, i had a feeling about the power switch so i jumped the wires on the switch purple to purple and green to green, I put it back together pluged it in the standby light came and stays on now, so i went out and got a universal remote for the sva at walmart for $15 programed it and pressto the tv works perfect so three fuses $3.60 two small pieces of wire and ele tape $0 my time 35 mins = one working plasma for $3.60 so when you have this problem like everyone else check the power botton switch, there cheap and check the fuses theres only three and if that dont work idk what to tell ya. and you do need a remote or tv wont work.
12/23/2015 7:06:44 AM •
SVA-USA...
•
Answered
on Dec 23, 2015
Not finding what you are looking for?