Playstation is on but screen is black

DEAR FRIEND, YOU WILL HAVE TO REPLACE THE BLUE RAY LENS OF YOUR CONSOLE

go into safe mode and restore factory settings first then if that dont work go back and choice restore system files. seems like your just have something corrupted and can be fixed.

Most likely the video setting are incorrect for your TV

Turn off the power to your PS3 and then turn it back on again. But when you turn it on, hold down the power button until you see something on the screen.

(When you hold down the power button of the PS3 when you are turning it on, it completely resets the video settings to the most basic settings (480p I think) so that it'll work on any TV or monitor.)

Try holding the power button on the PS3 for 5 seconds when turning it on. This will reset the default video mode. (The system might be set to component since you are using HDMI!)

ur back wirers r not in prbley u need something to hold them

when powwering on. hold the power button on the front of unit for about 15-20sec. that should reset back to factory settings

When tv and ps3 backswitch turned on hold down the front power button when off until the ps3 has done a double beep after the intitial beep and wait for a max of 1 min and initial set up screen should appear

your laser needs to be adjusted go to google playstation repair it will show you how to do it
good luck


shaun

1. Connect via AV and turn on the system.
2. Go to Setting and then Display setting
3. Select the connector type on your TV.
4. After you selected connector your TV screen may go staid black. Try to hook your HD cable while the system is still on. (This step should be done in 30 sec. If not, will go back to previous screen)
5. Your TV Screen should be on via HD cable
   

What happened to your PSP before this occured or have you done anything to it e.g. upgrading it to a newer firmware?it probably has gone bricked...