I have a rca truflat tv but lost the remote. How do I get to the input "channel"?

try to preset the channels bec,it is not on the tv button memory but only on remote.go to channel settings and preset cable channels

Almost any RCA or GE TV or universal remote should work.

Press menu on your remote. Press "4" for channel and "4" for video input source. In this menu, you can toggle between s-video and regular video (yellow plug) input. The disadvantage is, if you're like me and you've got a DVD player and and VCR (or maybe a video game system) all hooked up to the same TV, you've got to go through the menu and switch the inputs to watch something else. I'm happy with my digital audio cable; I'll deal with yellow-plug video.

Push the tv menu button on the front of the tv set.Go to Audio setup used the channel buttons UP and DOWN to pick ur choice.Can't do this manually.Try website like Remotes.com to buy an tv original remote.

Look for a "source" button, if you do not find one, just try scrolling through the channels as some TV sets will cycle through inputs after you cyucle through channels.

use the channel up or down buttons and keep going till you reach the last channel (99 maybe) then the tv will go into its other inputs.

Can you operate you Tv manually, If not check your remote to see whether your TV can be reprogramed.The buttons for the channels could be a problem.

There should be a button on the front of the TV that says TV/VIDEO or INPUT. Turn on the DVD player and put a DVD in it and press play. Press the TV/VIDEO button until the picture is present.

Good Luck....

There would be a RED,YELLOW,WHITE input cables that you would hook up to the back, there should be a Video mode on you remote turn it to one of the input channels and you should be fine.. Thanks and please rate.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

what chassis is in your set.look on rear panel ./st