RCA D52W19 52 doesn't power up and have a picture

Check the fuse. Check is you smell any burned fume from the TV..
Next time give the model and year of your TV.

Other than checking all the connections going to it for signal it is likely a shop repair.

The nature of these sets is someone must open and inspect them and check for voltages missing.

At that point it becomes a guessing game---try the boards (purchase them) and see if a bad board.

It is always possible the front screen unit or display has failed which is fatal cost wise.

You have to weigh the cost of repair, age of set and cost of replacement in this.

The only way anyone can KNOW which board is bad is to actually remove and replace it----most shops look at it and shoot you a high estimate.

let me know if you have questions.

Hello
If the remote control doesn't work, just buy one RCA RCR model universal remote control. Without remote control, you can't set the time to this set.

Sync the device with your windows media player and erase all that garbage software RCA gave you it doesn't work. After you Sync it you should be able to add your music from your media player, pictures, and video file will work fine otherwise you have to move all your music files into the RCA software.

I would resolder the inverter chips about five of those on the inverter board first. If that doesn't fix it, try the Power Supply unit (PSU), order this capacitors http://www.ebay.com/itm/Repair-Kit-RCA-L32WD22-LCD-TV-Capacitors-/230637983468?pt=LH_DefaultDomain_0&hash=item35b31856ec

or better if you can get a new PSU altogether, but doubt you can find one right now.

The PS3 can be hooked up to the tv using either a HDMI cable or the old RCA (Yellow, Red, White) cables. If you are having problems viewing a picture or hearing sound, here is some trouble shooting you might want to try.

Connect the PS3 using both the HDMI and RCA cables. select the HDMI input on your tv. turn on the PS3. If you cant see a picture, press and hold the power button until you hear 2 beeps (this will take about 15 seconds). This resets the PS3 to the old RCA cables. Select the RCA input on your tv. Hopefully you can see the image and hear the PS3 now. Go to the settings on the PS3 and change the display settings to output video through the HDMI. Remember, your tv can only go as high as 1080i resolution, so you wont see anything if you select the 1080p resolution.

If this didn't work, you might have a bad signal though the HDMI cable. Unplug the tv and PS3 for atleast 30 minutes, and then connect the PS3 to the tv before you turn either one on.

If this doesn't help, then you might have a HDMI cable that isn't recognized by either your PS3 or your tv. Try replacing your HDMI cable.

Hope this helps!

This RCA projection tv model have known to have many parts of capacitors components are dying and dead on the tv power supply board.That the board section where the tv power a/c cord plug into it.U have all the tools and can do bsaic soldering work too?Yes,try website like Tvrepairworld.com to buy the capacitors compponents set they put together and replaced all these capacitors parts on the tv power supply board section,will solved this problems.

First,make sure that you connected the cables like this
In the right side of the picture,you have an RCA-RCA cable. Find on the back of the dvd player, sound section> right and left RCA sockets. It doesn`t matter if they are not the same color,just plug the two RCA cables into the right and left sockets on the back of the dvd player

Flyback transfromer is defective and needs to be replaced.

i want to know who wants to sell me their rca t.v?