Crossover to Es 100 to JBL 8400P. I have Harmon kardon 460 reciver?

Hello Ranasinghe, you must connect a JBL satellite for each Main L and R output (2 speakers in total)
Connect one JBL for each Surround L and R output (2 speakers in total)
The middle speaker, to the output of the Central channel and the subwoofer, if active or powered, to the RCA subwoofer output on the amplifier
This way you would have all the speakers connected in the Harman Kardon 130

Hola Ranasinghe, debes conectar un JBL sat?lite por cada salida Main L y R ( 2 parlantes en total)
Conectar un JBL por cada salida Surround L y R ( 2 parlantes en total)
El parlante medio, a la salida del canal Central y el subwoofer, si es activo o potenciado, a la salida RCA de subwoofer en el amplificador
De esta manera tendr?as conectados todos los parlantes en el Harman Kardon 130

Hi I done a search on Google and found a schematic it might help. Type in. Harman kardon jbl creature schematic photo :::: I done this search on my phone ...good luck

If you wish to buy a genuine speaker, you should contact the autorized service center for harman kardon.
http://electronicshelponline.blogspot.com/

go to radio shack

http://www.harmankardon.com/resources/Brands/harmankardon/Products/ProductRelatedDocuments/en-US/OwnersManual/Owner's%20Manual%20-%20SB%2016%20(English%20EU).pdf

Here is the manual for you.

Harman kardon 347 power cant turn on i meed solution

http://audio.manualsonline.com/manuals/mfg/jbl/jbl_psw_d112_pswd112.html


The HK has a sub pre-out. That's the preferred method.

http://www.retrevo.com/support/Harman-Kardon-AVR-645-Receivers-manual/id/386bh042/t/2/

The boards can be repaired - look for we repair and your model number on ebay -

in what display i need to put reciver when i use the optical digetal