20 Most Recent
Questions & Answers
Volume wont adjust up or down but it will mute on
Volume can be operated via Remote.
The on stage II has front chrome-colored volume controls that aren't buttons per se, since they don't depress or move in any way. They're touch sensitive controls, one for volume up and one for down. Touching both simultaneously mutes the unit. Touch them both again to un-mute. Or you can use the remote to control volume, play, pause and skip tracks forward and back. The remote uses RF rather than IR which means you won't need line of sight and the remote can work through walls. The remote has a hold switch on the side and a clip so you an attach it to your belt, shirt or anywhere else you wish.
Thanks. keep updated for any more query.you can rate this solution
and show your appreciation.
JBL On Stage II...
on Jun 12, 2010
How to factory reset a JBL onbeat awake
For the JBL Awake
I just had the same issue and i found a way to solve this :
1. Unplug the power supply
2. Plug it back while holding the [ON/OFF] button
3. The screen shows “UP9” again
4. Do the update with the JBL Music app (I did it with my old iPhone 4s plugged on the 30pin connector)
5. Finish the firmware update ... until the app tells you to unplug the power before restarting the device
(Sorry for my bad English, i’m French)
on Sep 04, 2020
Where's the so to speak amp on jbl charge 3
The controls for the JBL Charge 3 are up top and you have volume up and down, Bluetooth pair, power, play/pause, and a button to link this device to other JBL speakers. There is no skip button, but if you hit the play button twice quickly it will skip to the next song
on Jun 18, 2020
Not finding what you are looking for?