Appearence of loop and no zigzag stich on ls-2125i brother

hi Sharon.
not sure if this will help you out because its saying its for the, ls 2125i.. but try this step by step link.


How to Thread Brother Ls 2125i Sewing Machine
or this youtube video link.

How To Thread Bobbin on Brother LS 2125 Sewing Machine

this link might be the best one for you to watch.when you go to this one scroll down the page a bit and you will see where you can watch the video,
How to Thread bobbin on the Brother LS 2125 sewing machine

Make sure that the needle is fully up first and raise the presser foot. To access the bobbin, you need to remove the flat bed attachment that is at the front of the machine. This just rotates up and off the machine. Next rotate the shuttle cover down from the top of the cover. Now you can pull out the bobbin case towards you by the latch. This piece goes across the center of the bobbin case and to the right. Now you can remove an empty bobbin (if needed) and put the wound bobbin into the bobbin case to replace the bobbin.

For this procedure, the pictures in the manual may be clearer than the written description. See pages 14 and 15 (16 and 17 for the PDF) in the manual. Brother currently has the manual here: http://www.brother-usa.com/VirData/Content/en-US/HAD/Consumer/UsersManual/UM_LS_2125i_EN_1628.PDF . The LS-2125i support is here: http://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=LS2125i . Click on the Manuals & Documents page. Most Brother manuals and other documents can be found by searching here: http://www.brother-usa.com/Support/ .

I hope this helps.

Cindy Wells

Personally it sounds like it could be a costly repair.A new Brother LS-2125i can be purchased online for about $80.00. Most sewing machine repair places charge upwards of $60.00 for a tune-up. So it's your call? Good Luck

Call Brother at 1-877-276-8437 and tell them that you have a lemon and want them to do something about it.

http://www.generalmanual.com/down.php?link=aHR0cDovL3d3dy5icm90aGVyLXVzYS5jb20vTW9kZWxEb2N1bWVudHMvQ29uc3VtZXIvVXNlcnMlMjBNYW51YWwvVU1fTFNfMjEyNWlfTVVMVElfMTE0NC5QREY%3D

Quick google search found this, hope it helps:

http://welcome.solutions.brother.com/BSC/public/files/dlf/doch000042/ls2220272015202125_iug03enfrespt.pdf

a class 15 plastic

Here is a download manual and page with some troubleshooting advise, for the ls-1217
look about the site and you may find
Manual
http://welcome.solutions.brother.com/bsc/public/us/us_ot/en/doc/manual_top.html?reg=us&c=us_ot&lang=en&prod=hf_ls1217eus

Troubleshooting (this may prove more helpful than the manual)
http://welcome.solutions.brother.com/bsc/public/us/us_ot/en/faq/faq_top.html?reg=us&c=us_ot&lang=en&prod=hf_ls1217eus

I hope this will help

i bought a new brother stiching machine ls2125. when i started to stich the same no stiching is coming only the mark is coming. why?

The brother website has a users manual for it that can be downloaded. Use this link to get it:

http://welcome.solutions.brother.com/bsc/public/us/us/en/doc/manual_index.html?reg=us&c=us&lang=en&prod=hf_ls2125eus&type2=5&flang=English&dlid=