Questions & Answers for: raise the foot

Ad

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...raise the presser foot lever release the foot by raising the lever located at the back of the presser foot assembly place a different presser foot on the needle plate so that the bar on the presser ...

Ad

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...raise the foot ? I would like to top stitch in order to finish the jacket. Any ideas will be appreciated. Thanks much. Jane Are you pulling the presser foot all the way up. Most machines, stop when ...

Ad

...raise the presser foot lever even when it's already raised and it won't work at all. Works just fine without the embroidery arm though. My moms does the same. One way we got around it was to hold the ...

Question about Esante

1 Answer

...the Zipper Foot around the presser bar from the back, and tighten the presser-bar screw. 3. If the raised edge (zipper or cording) is to the right of the needle, adjust the Zipper Foot by loosening ...

Question about 15218 Mechanical Sewing Machine

1 Answer

...raise the foot, only pushes the horizontal bar to the upper tension system. Can the piece that rides on the top of the lever be adjusted so it engages the lever sooner, thus raising the presser foot ...

Question about 15218 Mechanical Sewing Machine

1 Answer

raise pressure foot and needle and restart the machine. both are raised. how do I clear this error message. try lowering the pressure foot and the needle and then raise them again and then restart the

Question about 15218 Mechanical Sewing Machine

1 Answer

...See p. 10 of the manual. The presser foot lifter is on the right side of the leftmost part of the machine, towards the back of the machine. Press up to raise

...needle bar and presser foot. I've tried everything, can anybody help? Hmm. Raise the foot with the presser foot lever. You have to raise the foot up to get the fabric under the foot in order to

...RAISE the Presser Foot when threading the machine or when removing fabric. When threading or removing the fabric, try raising the needle to its highest point. Raising the presser foot releases the ...

...RAISE the presser foot when threading the top. Raising the presser foot releases the tension disks so the thread will seat properly. When the presser foot is raised, you should be able to pull the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6195 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18513 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...