The zoom button is not working properly. When you go to zoom in or out it goes all the way out or zooms all the way in. PLEASE HELP

if i have used zide zoom then power turn off

The zoom button merely zooms in on the display. It magnifies a portion of the picture so you can get a better look at what you're about to photograph. LiveView or otherwise, if you want to zoom, you have use the zoom ring on your lens (assuming you're using a zoom lens in the first place, of course).

Hello

Thank you for using FixYa for your problem

Zoom has had a knock
Always check the batteries first but if is it still giving the same fault, your camera is faulty.
It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras have any user-serviceable parts.

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

The lens Is trying to close properly but the focus mechanism has a problem, most likely jammed, so the lens cannot correctly close or work properly.
It will need to be opened up and reset.
Please email me. My email address is listed in my tips section on my profile.

You have to go to yur mouse configuration and change the middle button. Seems like it is set at minimizing the window.

unplug tv for five minutes then return plug....now press and hold the tv power button for ten seconds(This should reset it!)

1. Toggle the MODE button to camera picture and press the SET button
2. Compose your image while viewing the LCD monitor
3. Press the ZOOM thumbnail button with the magnifier picture to activate the digital zoom.can zoom images up to 5 times

4 Press the shutter button to capture the ZOOMED image
Hope this helps, there wasn't a date on your e-mail so not sure when your Holiday was.
Good Luck
Missy S

You're gonna kick yourself, but here goes, you know that clear plastic wide beam shield on the front, make sure it's fully inserted or else the auto zoom won't work while it's in use, (or the flash thinks it's in use)

This is a gradual breakdown of the zoom mechanism due to ingress of dirt or having had a knock. A repair will be expensive- Fuji support will advice.

This suggests the zoom motor has failed. As you only purchased it 2 weeks ago - it should be replaced under warranty