I purchased a replacement geared belt for my wife's vacuum cleaner via an aftermarket vendor. Of course, it came with no instruction and now I can't figure out how to get it around the pulley. I have taken out all the screws I can see, but I can't figure out how to access the pulley. I checked the manual and the only geared belt help it gives is with the powered hand tool. Any ideas guys? Thanks for any help,
- Tom
Tom, This one is tricky. First get the belt on the geared motor pully, and then insert the roller through it. You will have to roll the brush toward the body of the vac to have enough room. Patience is the best on this model.
I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c
446 views
Usually answered in minutes!
×