Questions & Answers for: u8173 belt

vacuum cleaner when we turn the unit on the spinner brush does not turn the belt is still on the brush but how do you get to the other end. go to thehooverstore online. here you'll find an exploded ...

belt change on savvy upright how do you change the belt Take off the bottom plate, also remove the screwsfrom the bottom to remove the top cover, also there is a screw under the Hoover emblem on the ...

Hoover Savvy Belt Happy Holidays. Trying to take your helpful advice on replacing the belt. The infamous sticker screw was a real help. I'm wondering if the belt goes on both sides of the spool that ...

belt replacement on u8171-900 Does the belt go over the spool in the middle of the assembly? Yes, it should be notched to fit the "gears" on the roller.

There is no suction check for blockages and clean your filters if the filters are clean then as your facing the back you will see 2 channels one is shaped like a j there are 10 screws take them out ...

How do I install the timing belt on my Hoover Savvy Vacuum? Modle # u8174-900 Where is it located? http://www.vacshopusa.com/hoover_savvy.htm This is a parts schematic for your hoover savvy. You have ...

I have a Hoover Savvy model U8174-900.. The beater brush only runs sometimes when I pull the unit backward. The handle switch seems OK but I cannot figure out why it is acting strange like this. ...

How to replace geared belt on Hoover Savvy U8171 I purchased a replacement geared belt for my wife's vacuum cleaner via an aftermarket vendor. Of course, it came with no instruction and now I can't ...

My hoover upright u8172-900. The unit provides suction, but roller does not turn. I can hear the motor click on when it is supposed to. I took the cover off, and found no belt. Does this one operate ...

...U8173-900 HAS HOSE SUCTION, BUT NOT FROM BOTTOM OF VACUUM. CHECKED FOR BLOCKAGE IN CHANNELS THAT HOLD THE HOSE. 1) check the hose for blockage.2) see the belt is slipin to due worn and replace .3) ...