PS2 In-car power supply for slimline model

Solve all your PS3 issues with a free guide from the site just for visiting. Its very helpful for all PS3 owners. Hope this helps out

There is no need for a special adapter. The cord that plugs into the wall is all that is needed for your PS2 to be used. Just make sure you have the rca plugs for audio and video in the correct sockets on your tv, plug in your controller, slide in a game, and awaaaay you go! :)
Hope that cleared it up.
Cheers from NZ

put all wires accordingly girl

GET U R PS2 MODIFY WITH MATRIX IC AND ENJOY EVER DVD

sorry a ps2 **BIG SYSTEM** wont fit ..now the ribbon in some of the old ps2 are thin insted of the wide type and they may fit but if i understand your ? right a ps2 lazer wont fit

if its in a region lock, its impossible to be played on a American PS2, if your PS2 is modded it will read any region locked discs, the only possible solution is to buy a Japanese Version PS2

1. Turn off your PS2 console.
2. Get your CAT5 Cable (link varies based on where your router or modem is).
3. Put one end of the cable into the port of the Network adapter (or slim PS2 and PSX) port labeled "Network".
4. Connect the other end in a free port in your router (or on the port on your broadband modem).
5. Turn on PS2.
6. Turn on modem (or router).
7. Put in online game.
8. Go to the online section in the game.
9. Create a network Configuration
10. Load it
11. Create an ID.

You might try a friends ps2 power supply of the same type to make shure it isnt the ps2 that is broken. If the friends power supply works, get a working one from ebay or something.

That would have been my first answer.  Glad it is working for you now!

What do you have to hold down, the cord from the adaptor to the machine or the cord from the plug to the adaptor? Did you get a shock when you first tried holding the cords down? The cords are pretty thick and the insulation should not peel off at all unlees you are also twisting the cord. Also if you lay the console flat instead of using the stand the problem may clear up, because you won't be twisting the cord.