GE Profile gas range - Model Number removed by previous owners. Black slide in range with warming drawer - 5-10 years old. Digital oven controls on left side Broil and Bake functions are reversed. When bake is selected, the top burner ignites and stays lit until preheat temp is hit, then goes out. Continues to come on and off to maintain set bake temp. When broil is selected, the bottom burner is lit, and stays on the whole time, only able to select high or low on broil selection.

Example of a free online manual found using https://www.google.com

https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-85239-1.PDF

On this model, the bottom drawer can be removed. If it is like yours, you would need to examine the handle to see.

Hello,
That sound very typical of a weak oven igniter. When its cold it takes so long to get to temp.it needs to be to ignite gas so gas collects in oven chamber before igniting then as its on it get hot a bit sooner. Eventually the igniter will weaken even more to the point will it will not ignite the gas at any time, replacing it now will prevent that. The part number for the igniter is WB13K21 it could be purchased at your local appliance parts store or online at;
searspartsdirect.com
repairclinic.com
apwagner.com
apdepot.com
midwestapplianceparts.com

To replace the igniter;
remove oven racks
remove oven door by locking hinges into place and lifting off of oven(if unable to figure how to lock hinges this step can be ommitted but it much easier with door out of the way)
remove oven floor
unscrew igniter from burner bar
disconnect wiring,which will be under storage drawer
pull out old igniter
run new igniter wiring down below to storage drawer area
screw igniter to burner bar
connect wiring
Test to see if works without booms when cold
reinstall oven floor
reinstall door
reinstall racks

I hope i have been able to help you fix your oven,
Gene

If you dont see it around the door or inside the stove you'll have to raise the top and it should be there somewhere. The part number for the glass top I can get for you if I have the model number

you need a new clock it operates seperately from the eyes. if you have 110 volts to it and it is not illuminated .it is out

Hi ewood,
You can look up your ge owners manual at ge.com . If the oven has stopped working chances are you have a bad ignitor. the part number is WB2X9154 . The part is $69.99 and I have this item in stock. Shipping will be $6.50 in the continental US>
I hope this will FixYa. If you have more questions please let me know. I can tell you how to remove the old ignitor if needed.
Anderson Appliance
Mike Anderson (Owner)
(865)945-3808

what does f2 mean when I am self cleaning my ge profile oven.

wrong call ge@ 100-851-6200 and they will help you have the model number handy before you call

this a common complaint when the element burns out it is scary to see but all you need to do is replace element

open the door on the left side low down you will find the model and serial number .
Visit the jenn-air website @ www.jennair.com or click
https://www.jennair.com/customer_care/contact_us.jsp

to email them and they can tell from the serial number and mail you back...

Pull the oven out and see if you can get to the pans from behind.  May have to lift up on the back of the oven to get out fallen pans.