At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I need to replace a cracked glass top (GE Profile...
If you dont see it around the door or inside the stove you'll have to raise the top and it should be there somewhere. The part number for the glass top I can get for you if I have the model number
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have to expand the search. My first search would be
GE JB910SL6SS (which part) glass
There are many companies, some hold stock, some order and drop ship from GE warehouse.
The other alternative is companies that only supply or even make tempered glass for ranges. the first hit is Amazon where you may be able to buy by searching the dimensions?
1 Unplug cooktop or disconnect power. 2. Remove the cooktop from its mounting location, (see “Installation Instructions” in Section 2). Position the cooktop so that you can access the bracket screws below the cooktop glass 3. Remove the fourteen flat-head screws from the front, rear, and side ceramic glass brackets. 4. Remove the two small side brackets from the cooktop base. 5. Lift and remove the ceramic glass from the cook top base.
Yes, but i believe it comes with the door handle already attached. Full model number, upper or lower and color is needed for looking up the part number. Expect to pay $210-280
Turn off the power to the oven. Remove the oven racks. Unscrew the element retaining screws on the rear wall. Carefully pull the terminals out of the back wall of the oven. Remove the wires. Place the wires on the new element,slide it into the opening,tighten the screws,replace the racks,turn on the power.
Go to www.applianceart.com and check out their instant stainless material which is perfect for refacing your existing appliances and getting the stainless look you want without the stainless pricetag. Contact these guys with any questions you may have.
Yes, the glass cook top can be replaced. These counter top inserts are actually fairly simple to repair, but the entire assembly usually has to be uninstalled to accomodate removing the glass top and installing a new one. You will need to provide a model number by opening the cabinet underneath the cook top and looking for a nameplate in order for me to assist you further in determing a part number, cost and how to disassemble.
its very expensive but to do it there should be screws up under the front u remove to be able to lift it up then u unplug the wires in the back set it on floor and swap all your elements over. make sure to turn off power
its not too bad.kill the power.then under the frount of the top where the top meets the oven door .under there are screws remove those and the top lifts up as on hinges.their is a ground screw wire to loose and unplug the the wire harness that connects the burners to the rest of the stove.then all is disconnected so lift entire top off from hinged area and set upside down on table.transfer all burners to new top thats nexted to old one upside down also.when done reinstall.ive done lots wont be bad.please dont for get to help me with my rateings.God bless ,tom
the front glass is broken and need to replace it
×