Question about Fisher Paykel EcoSmart GWL15

1 Answer

Washer won't go past the wash cycle

Start washer it goes through the wash cycles. then when it gets to the rinse cycle it sounds like it is working but after that it goes to the spin cycle and starts giving a beep. i followed book and unplugged for 60+ seconds plugged back in and problem happened again. Thinking water pump? your thoughts?

Posted by flyboytaz1 on

Ad

1 Answer

ALBERT GARCIA

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 975 Answers

YES !! check out the DRAIN MOTOR PUMP it could be clogged , AJ

Posted on Dec 18, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The cleaning cycle wont work.


Did you tried with different load?
It could be the control panel which is not to cheap.

Mar 09, 2013 | Whirlpool GHW9150 Front Load Washer

1 Answer

Whirlpool washer model lsr8233eqo


So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

Feb 03, 2013 | Whirlpool Washing Machines

1 Answer

Kenmore washer stops spinning a few seconds in to the cycle.


Sounds like the brushes are struggling to get enough power to the motor to spin. Renew motor brushes

Apr 21, 2012 | Kenmore Washing Machines

1 Answer

Machine will not spin or drain water.


I have a problem with my MW512AU. Sometimes it drains after wash cycle, but sometimes it sticks when it goes to spin, doesn't get up to speed, water comes on for about 10 seconds and shuts off, and it tries to spin again. If I hit the wash progress switch it goes directly to final spin and works ok. I then have to run a 2nd wash cycle to rinse the clothes. I also noticed a buzzing sound when I turn on the power point, which lasts about 3 seconds before stopping. It will come back on every 3-4 minutes for 30 seconds. This is with the machine power switch off. It powers on normally.

Mar 13, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Rinse and spin


there is a safety switch on the top...and when you close the lid it pushes down on that switch. investigate that switch and see if its just corroded or needs replacement...i have that same problem when i leave the lid open on my washer...then it works fine when i close it...so im figuring that your's thinks its still open. I hope this helps you out ! and give your wife a hug 8-)

Jun 05, 2009 | Washing Machines

1 Answer

Washer will not Spin during SPIN CYCLES


Thanks for the question If your washer sorta spins and washes ok, your problem is with the transmissionTHanks for your question THe Appliance doc

Jul 29, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Kenmore stack washer and dryer


gabehart....sounds like belt is slipping. Replace it. The water pump is on a separate smaller motor so is not affected by the agitator/spin motor.

Jun 04, 2008 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Fisher Paykel EcoSmart GWL15 Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Washing Machines Experts

Brad Brown

Level 3 Expert

18397 Answers

Mike

Level 3 Expert

4369 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Fisher Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...