Philips hdr 212 tivo manual recording

PHILIPS DVDR User manual DVDR3365 ManualsOnline com

If it's the only TiVo in the room, try the codes for Philips brand VCRs.

For a more involved answer, join us at the TiVo Community Forum

http://www.tivocommunity.com/tivo-vb/index.php?

Not a TiVo, Inc. site, an independent TiVo user community.

to my luck my son reset it by going to direct tv on screen and following the promps which allowed the second satelite to load ,which corrected the problem thanks for your response

http://support.tivo.com/app/answers/detail/a_id/1350

There are different codes depending on whether the Tivo was set to respond as a specific device (1 or 2) on the remote or by standard default (device 0). Also, typically each universal remote has its own code for each device, which is specific to the remote, not the device you wish to control. For the $20.00, it might not be a bad thing to simply buy a new universal remote that is capable of controlling a PVR (There are many good ones out there).

go to tivo.com they have all possible connections available.

pt

tivo button is the Directv button (tivo home) at the top of the remote. if u have the new directv remote, the tivo home button is the menu button. remote needs to be on satellite. to program codes.

You can do this. Just run the camera into the composite input. Then, go into the settings, setup of the tivo and make sure you have cable w/ cable box or satellite selected. It will test to see if you have a video signal on the composite inputs, just make sure your camera is on and outputting video. You may have to choose a channel like 0 or 3 to get video, but it should work. You may have to play with the actual setup but as long as it has video, then you should be good to go. Then, when you want to record, just setup a manual recording on that channel for however long you want to record and it should work just fine.

It is possible for the hard drive to fragment and in that case doing an entire hard drive erase and format should clear up that issue, but if it does not try looking at a possible buffer issue and the need for a software upgrade, I have seen this happen in some cases. DVR should go through an erase and reformat at least once every two months since you really should be storing your movies on a separate hard drive and using the internal hard drive for just temporary storage for viewing.