20 Most Recent Philips Magnavox Learning Universal Remote Questions & Answers

There is an easy way to setup this remote controllerl(RC). It called "Automatic Code Searching" which means that you don't have to even find the code. The controller will searching it for you. Just do the following steppes.

1. Turn on the "Device" to be remotely controlled, e.g. TV, VCR.

2. Point the RC right to the "Device" .

3. Press a device button on the RC represent the "Device", e.g. TV, VCR, DVD etc. You can see the indicator lid flash once.

4. Press the SET and than the POWER button on the RC. hold both buttons for 2 seconds or more, you will see the red lid on. then release both buttons simutenously. after that the indicator lid will be flashing, means the searching started.

5. Keep pointing the RC to the "Device" until it is shut down by the RC, Press any button in 1.5 second to finish the setting.

You can try the RC now. It should work. My one is working.

Philips Magnavox... • Answered on Nov 27, 2019

Download just the Philips Codes booklet for the Philips SRU3004WM/17 here. I have included the full codes booklet in a PDF format. Your welcome. Make sure you Thumbs up me!

Philips Magnavox... • Answered on Oct 11, 2019

Just reconfigure a remote control. This website has many kinds of tv remotes https://www.abctay.com/tv-remote-controls-c-66_4

Philips Magnavox... • Answered on Sep 05, 2018

It sounds like you have a problem with your 'main board'. It's board where all the outside connections come in or as we used to call it the 'tuner board' Gillight

Philips Magnavox... • Answered on Sep 05, 2018

Try spraying tuner cleaner down beside the button. Be sure you get a good turner cleaner like Chemtronics. If that doesn't work you will have to disassemble the remote and check the membrane under the buttons. If the button is used a lot it may be torn or wore out. Gillight

Philips Magnavox... • Answered on Sep 05, 2018

press and hold Tv VCR or DVD wait until the red light turns on then press power. Now press channel up or down until the the device turns on if you press it again while the device is on you'll have to do it again. After that hit OK then test it by pressing the volume button

Philips Magnavox... • Answered on Feb 02, 2018

You can go here to see if you can get a new factory remote TV Parts Universal TV Stands DLP Chips ShopJimmy or you can get a Harmony remote that will never go obsolete no matter how many times you change Tv's in the future or add components to your system

Philips Magnavox... • Answered on Oct 12, 2017

Try this web page


Philips Magnavox... • Answered on Sep 22, 2017

There may be a way to get to the audio and video without a remote by first pressing the menu button on the front of the set (if there is one), but the easiest fix is to invest in a good universal remote which will allow you to open the full TV menu. From the start up menu the remote will, after matching the code, allow you to go deeper into the start up menu to the audio/video menu and on to the "regular TV mode".

Philips Magnavox... • Answered on Jul 28, 2017

I have the vivid universal remote vrc4000 users manual

Philips Magnavox... • Answered on Oct 05, 2016

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Philips Magnavox... • Answered on Sep 22, 2016

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

976 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76620 Answers

Cindy Wells

Level 3 Expert

6278 Answers


Level 3 Expert

513 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Philips Televison & Video

  • Philips Televison & Video

Most Popular Question

srp2006 27 universal remote codes lg tv

  • Televison & Video