My viking truglide extension oven rack is not working right - how do i dissemble and reassemble it

Maybe these folks could help you...

https://expertappliancepro.com/PartSearch/findPart?unit_id=579&brand_id=19&unit_name=Stove-Gas+Parts&brand_name=Viking+Parts&part_item=Oven+Safety+Valve&partsitem=5628&part_number=VGSC3676BSS

PDF]Viking Use & Care Manual

www.vikingrange.com/MEDIA.../m3500217_F20669.pdf

Viking RangeClocks and Timers ... the potential risk of fire, electric shock, personal injury or damage to the appliance as a result ... NEVER use aluminum foil to cover oven racks or oven bottom. ... Keep area around appliance clear and free from combustible materials, .... 1. Push and hold the "MIN/SEC TIMER" and "BAKE TIME" buttons.

Hi,

Ok, I need some information from your to answer this question correctly. 1. How long is your preheat time? Must allow 30 mins for the oven to heat and settle, failure to do this you will have temperature issues, usually burning food. This unit was designed to use both elements to preheat, so inserting food too early will burn your food. 2. What rack position did you select for the product you cooked? This is really important!!! I am a certified tech and I understand this issue you have, but information is key to answer this for you. Most people don't read the instruction manual and treat this oven as all the others on the market. As the ovens get more features, its important to learn how to operate as instructed to avoid these issue and have a great turn out of good food at the same time. Please get back to me if you would like more help. Thanks Gere

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

....

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101


//

no u don't

Hi,

It is a matter of personal choice to whether you remove the rack`s or not, no harm will come to you from not removing them but...If they are chrome finished they will become very dull and look like bbq grills over time and in extreme cases, warp and consequently not fit well.

If they are finished with enamel to match the oven liner, don`t worry, they are designed to be left in place, even during self clean cycles.

As for how you can clean them. You can do this by removing them and with a suitable work space (a bath tub or laundry tub works great) with regular oven cleaner`s, (preferably environmentally friendly...check your local by-laws) or other household cleaners with the assistance of a scrub pad and elbow grease. Be sure and rinse them thoroughly when finished with the cleaner`s.

Hope that help`s. If so, please take a second to rate the solution provided by me here at fixya. Thank you.

Good luck.

macmarkus :)

Adjust the knob to the actual temperature. There are usually screws inside toe back of the knob for this purpose.

Contact Viking. I am pretty sure that the display unit still has a parts warranty.