Im having problem with my altec lansing atp3..the cable for my right speaker was biiten by my dog and was broken, do you know how to fix it?
Best bet would be to just strip the wire with a wire stripper or utility knife and twist the bare ends together to fix the connection. A little electrical tape around those wires and you should be almost good as new. Of course you might notice some difference in quality but I'm pretty sure the only way round that would be replacing the cable.
Try it out and let me know how it works out for you. If you know how to solder it might be a good idea to solder the connection as well.
My altec lansing speaker vs4621 is not working on the main unit(left side) even if the pink light is going on.I can hear the treble on the right unit and the bass speaker
5,303 views
Usually answered in minutes!
mine is the wiring inside the left speaker is loose..how can i open this left speaker?It doesnt have any screws..thanks for the help
how to connect a altec lansing model bx3 to laptop
altec lansing the executive manual
rear channel
×