HOW DO I GET MY SCREEN FIXED? ITS CRACKED AN INK SMUGGED?

You will need to replace your screen, so you can do it yourself by acquiring a new screen and replace it, take a look to this video

http://www.youtube.com/watch?v=Nyn1hZHeSXQ

No, it can't be fixed, the lcd screen must be replaced. Including the labor it will cost you more than the netbook is worth so either try to find a sh screen and replace it yourself (just a screwdriver is needed) or just junk it and buy a new one.

Hi baybiirobyn,
It would cost around 9 dollars,,

good luck with your fix,,,
have a nice day,,

Regards
Arul

it may cost as if you will buy a new phone.better buy a new one than repair

well if it is just the screen they just have to replace that, which could range from 10 to 30 $ but u should probbaly buy ghost guard for your phone to, really helpful wont let your screen just scratched or the rest of your phone

If you're printing on photo paper, make sure you are printing on the correct side. Most photo paper has only one side to print on, the other side is a non-porous backing, and ink will sit on the surface until it dries (15 - 30 minutes, depending on temperature and humidity). And it won't look good even when it dries.

If you're printing on the correct side, try a different brand/type of photo paper.

How long has the printer been in service?
Check your settings in the menu and see if you do not have it set too dark.
Take a moist paper towell and try dabbing off any excess ink from the head.
Go to http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198 and try ordering a new printhead, should be free.

CHAO - take the phone to a mobile service center and ahve it fix....it depends on the amount of work the techs have a process like this takes about 15-20mins.

GUEST - LCD or cable needs to be replaced

Not recommended for the average person to tackle.
You need the tools to take the phone apart, buy a new LCD and have a lot of patience and a steady hand to do the job.

I have a brother LC51 and when I try to fax, it rings but once the receiving fax picks up, I get a busy signal. Also, it will not receive faxes. Any Ideas. Thank You in advance for any suggestion.