How do you turn off mute ontvoice 503? - Radio Communications

First of all, you need to charge the BH-503 before connecting it to your gadget. On the BH-503 after it is fully charged, go to your gadget and turn on its Bluetooth. Mind you some gadget do not have embedded Bluetooth in them;all you do is to but an external Bluetooth and insert it in the USB port. That will make your gadget discover your BH-503. Pair the 2 together, I mean your BH-503 and your gadget and your up and running!

How to connect bluetooth headset Nokia BH-503 with Windows 7
I try to use bluetooth headset with my laptop(Dell Latitude E6500) but I can't find device Nokia BH-503 in my bluetooth searching windows.
Many people found this problem. How to fix it? I think this problem is human error or device manual not cover,how to use device with computer and laptop.
if you want to find your bluetooth devices when you search bluetooth devices from your computer.
- Turn off bluetooth headset.
- Start add bluetooth devices function from your computer for search bluetooth devices.
- Hold call button on Nokia BH-503 untill the light blue and red blink (not only light bule blink).
- You will see Nokia Bluetooth BH-503 in your searching window.
- select Nokia BH-503 device and click "Next" for connect the device
- wait for windows find and install driver.If can't found driver let to check it in this web -->>>http://blog.komeil.com/2009/05/installing-bluetooth-headset-in-windows.html

Here are the codes to try for your RCA TV: 503, 627, 656, 742, 645, 633, 548, 630, or 653.

Below is the instructions on how to program the remote to your TV:

• Remotes: Basic (Television Only)
  1. Turn the Television On.
  2. Press and hold the clear TV button for three seconds until the LED buttons at the top of the remote flashes.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press #. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Here are the codes for your Coby TV: 500, 503, or 00.

I have provided instructions on how you can program the remote to your TV:

• Remotes: Basic (Television Only)
  1. Turn the Television On.
  2. Press and hold the clear TV button for three seconds until the LED flashes.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press #. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

vsidharth I had the same problem with my satio.. i fixed it,

what to do is pair your bh-503 then click on auto connect.. now click on bh-503 a menu pops up look for set unauthorised.. turn it on
now turn off your ear phones and back on, your satio will say connect, and will now give you the option to enter your pair code 0000.. once you done that, your ready to go.. hope this helps

i thing that for you use the Different charger try to use this original charger that was came with it and if you have any another problem you can chat with me ad try to find all Solution my Email [email protected]

http://www.dxgusa.com/CustomerService/Manuals/DXG503.pdf is the instruction manual for the camera. Page 28 explains how to turn off the self timer. Hope this helps!

503 a or plain old 503 . one is a hh the other is a radio .You can get one of them at www.cbtricks.com

If this camera has a memory card, remove it and then try turning it on. Sometimes the memory cards make the cameras act different.

If there is no memory card or card is out and you have same problem, you can send it in to DXG company and they will repair it for $50

That is "CS of modem is not able to turn ON during training." It could be a bad SC circuit board, but usually that's a bad line or connection. Get your phone lines checked out by your phone company.
If that doesn't do it, then you'll have to replace the board in the fax machine.