Kitchen Ranges Logo

Related Topics:

G
Gayle Nathanson Posted on Sep 17, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

A fan runs constantly when my Dacor ERD30 oven is in bake mode. Is this normal?

1 Answer

brokenrubber

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Night Owl:

An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert 103 Answers
  • Posted on Sep 21, 2018
brokenrubber
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

Night Owl:

An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

Joined: Nov 28, 2008
Answers
103
Questions
0
Helped
41568
Points
174

Yes the cooloing fan runs when oven is turned on and should be set to continue running after oven is turned off
it should be set to run until oven drops below 300 deg f
this can be changed if not set correct

2 Related Answers

Anonymous

  • 1665 Answers
  • Posted on Apr 05, 2008

SOURCE: Dacor ERD30 oven trouble

See Page 8
http://www.dacor.com/Dacor.Website/WorkArea/showcontent.aspx?id=1297
1. ERD models must be connected to a grounded,
metallic, permanent wiring system. Alternatively,
a grounding conductor should be connected to
the grounding terminal or lead on the appliance.
2. ERG models must be connected to a grounded
receptacle. Failure to do so may result in an
electrical shock hazard.
3. Do not use an extension cord with this appliance.
Such use may result in fire, electrical shock, or
other personal injury.
4. Do not install a fuse in the neutral or ground
circuit. A fuse in the neutral or ground circuit may
result in an electrical shock hazard.

Ad

Anonymous

  • 1665 Answers
  • Posted on Apr 05, 2008

SOURCE: ERD30 will not reach or maintane setpoint

http://www.retrevo.com/s/Dacor+ERD30?rt=mi&p=http%3A%2F%2Fwww.dacor.com%2FCustomer-Care%2FManuals-And-Specs.aspx%3FTaxonomyId%3D509

http://www.dacor.com/Dacor.Website/WorkArea/showcontent.aspx?id=1297

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Dacor ERD30 oven trouble

HI,

Check if both circuit breakers for the oven are on.
The control board needs only 120V but it should be 240V for the heating elements to function properly.

Check if there is 120V coming to the thermal fuse.

when you get your meter . put the oven on bake and check your power on the bake element if you do not have 240 volts then your control board is bad. if you have 240 volts then you element is bad.

Goodluck,
Please don't forget to rate the solution.
0helpful
1answer

Large oven in dacor dual oven range broiler comes on when i select bake

on bake both bake and broil will come on the broil shuts down around 260 deg
this is normal its done to shorten preheat time
0helpful
1answer

I have a dual fuel Dacor ERD30 range that will not stay hot. Lately, it will heat up to the desired temperature and beep to indicate it is ready, but then will not hold the temperature. And strangely, if...

Sounds similar to what mine is doing.
Since Dacor uses the gas broiler to preheat the oven, the problem is that the lower heating element isn't getting power.
I took out the element and verified that the element is still good, but no AC voltage coming from the relay board to the element.
Try setting on the Pure Convection mode - it will probably heat up and hold the temp fairly well - that still doesn't do any good if you need to bake something covered (convection modes are useless for covered container..
1helpful
1answer

Dacor rsd305

Once you replace the oven control again....never use self clean on any oven....unless you want to replace parts.
Before you replace the control...look inside the control panel for a resettable thermal fuse.
0helpful
1answer

ERD36 Oven over heats

If the oven stays off when turned off then it is definitely a controller board problem. - that would mean the element is coming on and there is no control - changed the controller

Regards
0helpful
1answer

Dacor ERD30 oven trouble

See Page 8
http://www.dacor.com/Dacor.Website/WorkArea/showcontent.aspx?id=1297
1. ERD models must be connected to a grounded,
metallic, permanent wiring system. Alternatively,
a grounding conductor should be connected to
the grounding terminal or lead on the appliance.
2. ERG models must be connected to a grounded
receptacle. Failure to do so may result in an
electrical shock hazard.
3. Do not use an extension cord with this appliance.
Such use may result in fire, electrical shock, or
other personal injury.
4. Do not install a fuse in the neutral or ground
circuit. A fuse in the neutral or ground circuit may
result in an electrical shock hazard.
0helpful
3answers

ERD30 will not reach or maintane setpoint

read your owners manuel and follow the instructions for adjusting the oven temp set it 15 degrees higher
Not finding what you are looking for?

141 views

Ask a Question

Usually answered in minutes!

Top Dacor Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66968 Answers

Are you a Dacor Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...