What replacement bulb do I need to buy for Sunbeam Wine Cooler BC 130D

Sorry we do not have parts locator services here.

Hello there,

How many techies does it take to change a light bulb (without a hammer)?

There is a tiny screw holding the lens cover in place. Once removed, the lens will come off and you can access the bulb.

Hope this helped

Thanks for using FixYa

Mike

If its one of the bulbs that looks like a small glass tube that has metal on both ends good luck! I tried to find a bulb for my cooler and you have to 100 of them , they won't sell just one.

Return the compressor and buy another wine cooler. This work is too complex for people that do not do this every day, Thanks Sea Breeze

needs re gassing....................
cheers

The price looks fine for my area its about a 3 hour job done properly. you should consider a new wine cooler and cut your losses because if their only replacing the compressor they should be replacing the cap tube and liquid drier if the cap tube is not replaced could be a waste of money

Tom

Hi LinnieMcAdam,

I'm Harvey the Master Plumber.

Your question is: Where can you find a 10 Watt replacement light bulb for your Haier Wine Cooler?

I usually have success at the hardware store. Start there. Then you can try the store where you bought it or call Haier.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

It sounds like the bulb is not getting power. There is a door switch that turns it off when the door closes...this may be stuck. There is usually an optional (depending on age) ON/OFF switch that overrides the light to be on full time. If the light will also not turn on with that switch then there must be a disconnected or broken wire either going to the light switches or going to the light socket from the switches. I hope this helps.

Took everything out and got on my back with flashlight to find a tiny screw holding lens in place.  Found that a little night light fit and worked fine.  Wish the manual had a simple direction to fix the problem.