SOURCE: The battery on the Pride Jazzy 1103 will ot take a
Have the batteries load tested. If they have sat to to long then they will need to be replaced.
SOURCE: Re: Pride Jazzy 1103 Ultra.
When the power seat lift lowers down, there is usually a bracket that pushes a button under the seat that tells the motor the seat is lowered and the power chair is safe to operate. Sometimes the bracket can get bent and the button does not get pressed when the seat goes down. Check under the seat around the seat post for the button and make sure the bracket is connecting to it. Carefully bend it back into place if it is not hitting the button properly. If the bracket came off, it will need to be replaced.
Good luck!
SOURCE: pride mobility Jet 3 Ultra
Hi, well as long as it's operating Ok, then we are all good,and perhaps it is something simple, such as there is NO profile, or a Profile hasn't been set, or chosen?
www.pridemobility.com/pdf/...Manuals/US.../US_Jet_3_ultra_om.pdf
above & below, are your manual so you can check settings etc.
www.pridemobility.com/...Manuals/product_owners_manuals.asp
Below is your troubleshooting website How To.
www.pridemobility.com/.../basic_troubleshooting_guides.asp
SOURCE: y mom's jazzy 1103 ultra will not operate .
Those blinking battery level LED's are showing a trouble code. Count them ("all of them" is the wrong answer). Then refer to this page:
Pride Mobility Products Corp Basic Troubleshooting Instructions
I know the 1103 isn't on the list, but all the Pride chairs use the same codes. Try the 1107 guide.
326 views
Usually answered in minutes!
×